1,029 Matching Annotations
- May 2019
-
sg.inflibnet.ac.in sg.inflibnet.ac.inChapter 272
-
After restriction enzyme digestion, digested products wereresolved on agarose gels and desired DNA fragmentswereextracted from the gel. Concentration of gel-extracted DNA fragments was determined usingspectrophotometerand ligation reactions were set up using a molar ratio of vector to insert of 1:3 and 1:1 for sticky and blunt end ligations, respectively. Ligation mixwas incubatedeither at 22ºC for 4 hor at 16°Cfor 14-16 h. After incubation,T4DNA ligase was inactivatedat 65ºC for 20 min
-
QIAGEN QIAquick PCR purification kit containing buffers, spin columns and collection tubes wasused topurify DNA fragments from PCR andenzymatic digestion reactions as per the kit manufacturer’s instructions
-
QIAGEN QIAquick Gel extraction kit containing required buffers, spin columns and collection tubes was used to extract and purify DNA from agarose gels. Digested DNA sample was resolved on 1-1.2% agarose gel and gel piece containing desired fragment was cut ona UV-transilluminator. DNA fragment was purified as per the kit manufacturer’s instructions
-
C. glabratacells grown either in RPMI medium or harvested from THP-1 macrophages were collected, washed with DEPC treated water and were disrupted with glass beads in trizol. Total RNA was isolated using acid phenol extraction method and frozen at -80C. Quality of RNA was examined by determiningtheRNAintegrity number (RIN) before microarrayanalysis.Microarray experiments wereperformed atOcimum Biosolutions Ltd., Hyderabad (http://www.ocimumbio.com). Briefly, a4x44K GE Agilent array comprised of 10,408 probes representing 5,205 ORFs of C. glabratawas used wherein average number of replicates for each probe was four to five. Feature Extraction software version 10.7.3.1. (Agilent) and Quantile normalization was used for data analysis. Hierarchical clustering was performed using Complete Linkage methodwith Euclidean Distance as distance measure. Data arethe average of two hybridizations from biological replicates ofeach sample and raw data sets for this study areavailable at the Gene Expression Omnibus database(Accession number -GSE38953)
-
To preclude the possibility of human RNA contamination, cDNA prepared from internalized yeast was examined for the presence of human transcripts encoding Ccl5 and histone H3. However,no amplification forhuman genes was observed, thus, eliminating any possiblecontamination of THP-1 RNA with yeast RNA
-
Primersfor real-timePCR analysisweredesigned using Primer3 plus software and are listed in Table 4. To extractRNA from macrophage-ingested C. glabratacells, infected THP-1cells were washed twice with PBS and lysed in 1 ml ice-cold water. Lysate was centrifuged followed by two quick washes with DEPC-treated water andwashed yeast cell pellets were frozen on dry ice.For RNA extraction, yeast cells were disrupted with glass beads in trizol and total RNAwas isolated usingacid phenol extraction method described above.Optimal primer and cDNA concentrations were standardizedand qRT-PCR was performedusing ABI 7500 Fast Real-Time PCR System (Applied Biosystems).In brief, 0.5 μl cDNA,0.1 to 0.2picomoles of gene specific primers and 10 μl 2X MESA GREENqPCR™ Mastermix Plus containing SYBR green dye (Eurogentec)were mixed in thewellsof a 96-well PCRplate (Axygen). Final reaction volume was adjusted to 20 μl with DEPC-treated water. Transcript levels were quantified with an end-point value known as Ct(cyclethreshold). Expression of TDH3, which encodes CgGapdh,was used asaninternal control. The Ct defines the number of PCR cycles required for the fluorescent signalof SYBR green dye to cross beyondthe background level.Fold-change in transcript expression was determined usingfollowing formula.Fold change in expression = 2-ΔΔCtΔΔCt= ΔCttreated -ΔCtuntreatedΔCttreated = Ctvalue forthe gene of interest under treated condition -Ctvalue forthe internal control gene (TDH3) under treated conditionΔCt untreated = Ctvalue forthegene of interest under untreated condition -Ctvalue forthe internal control (TDH3) gene under untreated condition
-
Complementary-DNA synthesis was doneusing reverse transcriptase enzyme and oligo-dT primers. For this, 1 μg good quality RNA was treated with1μl(1 unit) DNase I for 15 min to remove DNA contamination. Next, SuperScript III First-Strand Synthesis System kit (Invitrogen) was used to synthesize cDNA according to the manufacturer’s instructions. cDNA synthesized was stored at -20 ̊C till further use
-
For RNA experiments, all solutions were prepared in RNase free diethylpyrocarbonate (DEPC) water. Microcentrifuge tubes and tips used for RNAworkwere autoclaved twice and driedat 70 ̊C for overnight before use. Non-autoclavable plastic items were wiped with Ambion RNAseZap to remove RNAse contamination, if any. RNA was extracted from C.glabrata cells usingacid phenol extraction method. C. glabratacells were harvested at 2,500g for 5 minat 4 ̊C, resuspended in 1 ml ice-cold DEPC water and were transferred toa2 ml microcentrifuge tube. Cells were spun down at 6,000g for 3 minat 4 ̊C and resuspended in 350 μl AE solution. Next, 50 μl SDS and 400 μl acid phenol(pH 4.5)solutions were added to thetube and mixed well by vortexing. The tube wasincubated at 65 ̊C for 15 min with continuous mixing. After incubation, tube was kept on ice for 5 minand centrifuged at 7,500g for 5 minat 4 ̊C. Aqueous phase was transferred toa new 1.5 ml microcentrifuge tube and RNAwasextracted with an equal volume of chloroform. Total RNA was precipitated at room temperature with 1/10thvolume of 3 M sodium acetate (pH 5.2) and 2.5 volumesof chilledabsolute ethanol for 20 min. Precipitated RNA was collected by centrifugation at 7,500g for 5 minat 4 ̊C. RNA pellet was washed with chilled 70% ethanol and resuspended in 50 μl nuclease-free water. RNA concentration was determined by measuring absorbance at 260 nm. Quality of extracted RNA was examined by gel electrophoresis on 0.8% agarose gel prepared in DEPC-treated TAE buffer
-
Nucleosomal-associated DNA was extracted from RPMI-grownand macrophage-internalized C. glabratacells using EZ NucleosomalDNA prep kit (ZYMO Research),treated withmicrococcal nuclease digestionfor 2.5, 5, 7.5 and 10 min at 25ºC andwasresolved on 2% agarose gel
-
temperature. Genomic DNA pellet was dissolvedeitherin 50 μl 0.1X TE or molecular biology grade water containing 0.3 μlAmbion RNAse cocktail and incubated at 37ºC for 30 min.After RNA digestion, 100 μl of 0.1X TE or nuclease-free water was added to the tube and stored at -20ºC. Quality of extracted genomic DNA was checkedon 0.6% agarosegel by electrophoresis
-
Desired C. glabratastrain wasgrownovernight in YPD liquid medium and yeast cells were harvested by centrifugation at 2,500g in 15 ml polypropylene tube.Yeast cells were washed with PBS, resuspendedin 500μl lysis buffer (Buffer A) andwere transferred toa2ml microcentrifuge tube. Yeast cells were incubated for 15 minon a thermomixer set at 65 ̊C and 750 rpm. After incubation, 0.5 gm glass beads (0.5 mm) and 500 μl PCI solution were added to thetube. Yeast cells were lysedthree times for 45 seconds each on a bead beating apparatus with intermittent cooling on ice to prevent overheating. Cell lysates were centrifugedat 7,500gfor 5 minandupperaqueous phase (300-350 μl) wastransferred carefully to a new 1.5 ml microcentrifuge tube. 1 mlabsolute ethanol was added andmixedwellby inverting the tube3-4 times. To precipitate genomic DNA, suspension was centrifuged at 7,500g for 10min.Precipitated genomic DNA was washedwith 70% ethanolanddried at room
-
C. glabrata cells were grown overnight in 10 ml YPD liquid medium. Cells were harvested at 2,500g for 5 min, resuspended in 400 μl Buffer A (50 mM Tris-HCl, 10 mM EDTA, 150 mM NaCl, 1% Triton X-100 and 1% SDS) and were transferred to a 2 ml microcentrifuge tube. Equal volume of phenol-chloroform-isoamyl alcohol (PCI) solution was added tocell suspension and tubes were vortexed for 2-3 min. After incubation at 42 ̊C for 30 minon a thermomixer set at 800 rpm (Eppendorf), cell debris was removed by centrifugation at 7,500g for 10 minand aqueous phase (300-350 μl) was carefully transferred to a new 2 ml microcentrifuge tube. Genomic DNA was precipitated with800 μl chilled absolute ethanol and 35 μl sodium acetate (3 M, pH 5.2). DNA pellet was washed with chilled 70% ethanol and dried at room temperature for 5-10 min. Genomic DNA pellet was dissolved either in 50 μl 0.1X TE or molecular biology grade water containing 0.3 μl Ambion RNase cocktail and incubated at 37 ̊C for 30 minfor digestionof RNA. After RNA degradation, 100 μl of 0.1X TE or nuclease-free water was added to the tube and stored at -20ºC. Quality of extracted genomic DNA was checkedon 0.6% agarosegel by electrophoresis
-
Stripping of membranes in buffer containing 0.4 M NaCl yielded slightly better results. Hybond membranes were reused for 5-10 times after stripping
-
Radiolabeled-bound probes were stripped from the membrane by boiling in 1% SDS containing 0.1X SSC for 15 min. Alternatively, membraneswereincubatedtwicein stripping solution (0.4 M NaOH)at 45°C for 30 minto remove the bound probes
-
After 2-3 h exposure,phosphorimagerscreenwas scannedon Fuji FLA-9000 to acquire hybridization images. Next,signal intensity for each spot on the membrane for both input and outputsampleswas quantifiedusing Fuji Multi Gauge V3.0 software andpercentage intensity foreach spot relative tothe whole signal intensity ofthe membranewas determined.To identify mutants with altered survival profiles,ratio of output (Op) to input (Ip) signal for each spot (oligonucleotide tag)present on the membranewas calculated.Mutantsdisplaying at least 6-fold higher and 10-fold lower survival were selectedas “up’ (Op/Ip= 6.0) and ‘down’ (Op/Ip = 0.1) mutants, respectively
-
After14-16 hincubation, hybridization buffer was decanted to a radioactive liquid waste container.Membraneswere washedtwice with 2X SSC (saline-sodium citrate) containing 0.1% SDS for 15 min at 55°C followed by two washes with 1X SSC containing 0.1% SDS for 15 min at room temperature. Post washes,membranes were rinsed with 1XSSC buffer at room temperature and exposed to phosphorimager screen for 2-3 h
-
Primers (OgRK 25 and OgRK 26, 200 pM ) –1 μl, eachTaq DNA polymerase –0.5 μlαP32-dCTP( specific activity-3,000 Ci/mMol)–2.5 μlWater –38.5 μlαP32-dCTPlabeled PCR productswere denatured by incubatingtubesat100°C for 5 min followed by immediatechilling on ice. After 2 h prehybridization, radiolabeleddenatured input and output probes were added to respective bottles and bottles were transferred to a hybridization oven set at 42ºC and 6 rpm
-
Two Hybond-N membranes,each carrying 96 immobilized DNA with unique signature sequences,were transferred to 15 cm long hybridization bottlesandlabeledas input and output. 10 mlprehybridization buffer was added to each bottle and bottles were transferred to a hybridization oven setat 42ºC and 6 rpm. To prepare input and output probes,genomic DNAsfrom input and output C. glabratacell pelletswere extracted using glass bead lysismethodandunique signature tags were PCR amplifiedwith nucleotide mix containing αP32-dCTP using primerscomplementary to the invariant region flanking each unique oligonucleotide sequence.Following is the composition of50 μlPCR cocktail used to prepare radiolabeledinput and output probes.10X PCR buffer–5 μldNTP mix (without dCTP, 2mM) –0.5 μldCTP (0.05 mM) –1 μl
-
E. colistrains containing plasmids with unique oligonucleotide signature sequences were inoculated in LBmedium containing ampicillin and grown overnight at 37°Cand 200 rpm. Plasmids were extracted, quantitated anddenatured in alkaline denaturing solution. Approximately, 200 ng of each plasmid DNA was transferred to theHybond-Nmembraneusing96-well Dot Blot apparatus. Membranes were neutralized in 2X SSC and denatured plasmids were cross-linked to Hybond-N membranes usingUV cross linker
-
E. colistrains carrying plasmids were inoculated and grown overnight at 37ºC and 200 rpm in LB-liquid medium supplemented with either 50 μg/ml ampicillinor 30 μg/ml kanamycin. Cells were harvested by centrifugation at 2,500g for 5 min. Plasmids were extracted using Qiagen plasmid miniprep kit following the manufacturer’s instructions. Concentration of the extracted plasmid DNAs was measured using spectrophotometerat 280 nmandstored at -20ºC
-
Genomic mapping of disrupted locusin Tn7insertion mutants was carried out as describedpreviously(Kaur et al., 2004).C. glabratamutants carrying Tn7insertionswere grown in YPD-liquid medium and genomic DNA was isolated fromovernight cultures. 10 μg genomic DNA was digested either with restriction enzyme MfeIor SpeI.Restriction enzyme-digestedDNA was precipitated with 1 ml ethanol and 1/10thvolume of sodiumacetate (3 M,pH 5.2). DNA pellet was washed twice with ice-cold 70% ethanol, air driedand was resuspended in sterilewater. DNA was recircularized with T4 DNA ligase.Resultant circular DNA carriedTn7cassette flanked on bothsidesby the disrupted locus oftheC. glabratagenome. CircularDNA wastransformed in E. coliBW23473 strainwhich contains protein Π (the product of the pirgene) required by R6Kγorifor replication.Twoverified transformants were grown overnight in LB-kanamycin medium and plasmids were extracted. Purified plasmids were sequenced withprimers reading outwards (OgRK 183 and OgRK 184) from both ends ofTn7cassette.Sequences obtained were compared,usingBLAST,against C. glabratagenome sequence database and regionsof Tn7insertions in C. glabratawere mapped
-
E. coli BW23473 electro-competent cell aliquots were taken out from -70ºC freezer, thawed on ice and were mixed with 1-2 lplasmid DNA. Mixture was pulsed with the Gene Pulser® electroporation apparatus (Bio-Rad),set at 1800 Volts, 25 μF and 200 Ω,in a chilled 0.1 cm electroporation cuvette. After electric pulse, 1 ml LB medium was immediately added to the cuvette and suspension was transferred to a 1.5 ml sterile microcentrifuge tube. Cells were incubatedat 37°C and 200 rpm for 1 h, centrifuged and were plated on LB-agar plates containing kanamycin (30 μg/ml). Transformants were colony purifiedon LB-kanamycin plates. Positive clones were verified by colony PCR and inoculated in LB-liquid medium containing kanamycin (30 μg/ml) for plasmid isolation
-
To prepareelectrocompetent cells, a single colony of E. coli BW23473 strain from a freshly-streaked LB agar plate was inoculated in 50 ml LB liquid medium. Culture was incubated at 37°C for 14 h with continuous shaking at 200 rpm. 25 mlovernight-grown E. coliBW23473 culture was transferred to 500 ml LB liquid medium and incubated at 37°C till the OD600 reached to 0.4. Post incubation, cultures were transferredto ice and centrifuged at 1,000g for 15 minat 4°C. Cells were washed twice with 500 ml ice-cold sterile water, three times with 250 ml ice-cold 10% glycerol solution and resuspended in 1 ml 10% glycerol solution. After absorbance measurement, cell suspension was normalized to final cell density of 3X1010cells/ml and dispensed in 50 μl aliquots to sterile ice-cold 1.5 ml microcentrifuge tubes. Aliquots were snap frozen in liquid nitrogen and stored at -70ºC
-
E. coliDH5α strain was transformed with plasmids carrying appropriate inserts to clone and generatedeletion strains of C. glabrataORFs(Sambrook, 2001). Ultracompetentcells stored at -70⁰C were thawed on icefor 5-10 min. 5 μlligated plasmid was added to100 μlultracompetent cells andcells were incubatedon ice. After 30 min, competent cells were subjected to heat shock at 42⁰C for 90 seconds. Cells were immediately transferredtoicefor 2-3min. Next, 800 μlSOC (or LB) medium was added and cells were allowed to recover for 45 minon a shaker incubator set at 37⁰C.After the recovery, cells were centrifuged at 2,500g for 4 min. Medium supernatant was discarded and cells were resuspended in 200 μlfresh sterile LBmedium. Cells were plated on LB agar medium containing appropriate antibiotics. Plates wereincubatedat37⁰C for 12-16 h
-
10 min at 4 ̊C and gently resuspended in 20 ml ice-cold Inoue transformation buffer. To this cell suspension, 1.5 ml sterile DMSO was added and swirled gently. Cell suspension was kept on ice for 10 min and 50 μl volume was aliquoted to chilled sterile microcentrifuge tubes. Cells were immediately snap-frozen in liquid nitrogen and stored at -80 ̊C
-
A single colony of E. coli DH5α strain was inoculated in 10 ml LB medium and incubated at 37 ̊C for overnight. 4 ml overnight culture was inoculated in 2 lt SOB medium and incubated at 18 ̊C till the OD600 reached to 0.5. Cultures were centrifugedat 2,500 g for 10 min at 4 ̊C and harvested cells were washed gently with80 ml ice-cold Inoue transformation buffer. Cells were collected by centrifugation at 2,500 g for
-
A microtipful of cellsfor each yeaststrainfrom appropriate mediumwassuspended in 10μlzymolyase cocktailandincubated at 37ºC for 90 min. 2 μlof zymolyase-treated cell suspension was used as template in 25 μlPCR reaction
-
Alipophilic styryl dye,FM4-64,is a vital stain which istakenupby cells viaendocytosis through plasma membrane(Vida and Emr, 1995). Therefore, it fluorescesonly in live cells. Importantly, neitherfixed cells canbe stained with FM 4-64norcells canbe fixed afterFM 4-64staining. For vacuole staining, single colony of the test strain grown onYPD plate was inoculated in 10 ml YPD medium for overnight. 100 μlovernight culture was inoculated in fresh YPD medium and incubated at 30ºC for 3 hto obtain log-phase cells. C. glabratacells from 1 ml log-phase culture were harvested at 4,000 rpm for 5 minin a table top centrifuge. Supernatant was aspirated out,cells were resuspended in 50 μl YPD medium and 1 μl FM 4-64 (16 μM final concentration) was added.C. glabratacells were incubated in a 30ºC water bath for 30 min. 1 mlYPD medium was added and cells were harvested at 4,000 rpm for 5 minin a table-top centrifuge. After discarding supernatant,C. glabratacells were washed with fresh YPD medium and resuspended in 1 ml YPD medium. C. glabratacells were incubated at 30ºC for 90 min, washed with 1 mlsterile water and were resuspended in 50 μl YNB medium. Labeled C. glabratacells were observed underfluorescence microscope in red filter(730nm)
-
centrifugation at 5,000 rpm for 4 minat room temperature. Harvested cells werewashed with PBS and treated with different compoundse.g.H2O2. After treatment,cells were harvested and further processed according to the type of experiments performed
-
For several experiments, log-phase C. glabratacells were harvested and treated with different compounds. For this, single colony of aC. glabratastrain was inoculated in YPD-liquid medium and grown for 14-16 h at 30ºC withcontinuous shaking at 200 rpm. Overnight cultures were reinoculated in YPD medium to an initial OD600of 0.1 andgrown for another 4 h. These log-phase cells were harvested by
-
For opsonization,C. glabratacells were incubatedwith 1 μg/μl human IgG for 30 min at 37°C and washed thrice with PBS. Alternatively, yeast cells were incubated with 25% human serum at 37°C for 30 min followed by threePBS washes
-
C. glabratastrains were grown overnight in YPD medium. Cellswereharvested from 1 mlcultureandwashed withPBS.Cells were next washed with50mM NaH2PO4andresuspendedin 100 μlFITC-dextran(50mg/ml). After incubation at 37°Cfor 45 min, cells were washed thrice with PBS for complete removal of FITC-dextran.Yeast cells were resuspended in 1 ml PBS and used to infect PMA-treated THP-1 cells in 4-chambered glass slide
-
24 h post infection, THP-1 macrophages were washed thrice with PBS, lysed in water and recovered yeast cells were used to infect THP-1 cells at a MOIof 1:10. Three rounds of macrophage infection foreach mutant pool were carried out to enrich for the desired mutants in the final population. The lysate of 3rdround infection was inoculated in YPD medium for overnight (output). Cells were harvested, genomic DNA isolated from each input and output cell pellet andunique signature tags were PCR-amplified with P32-labeledα-dCTP using primers complementary to theinvariant region flanking each unique tag sequence. LabeledPCR products were denatured at 95°C for 10 min, chilled on ice and were hybridized tonylon membranescarrying immobilized plasmid DNA containing 96 unique tagsfor 14-16 h at 42°C.Membranes were washed twicewith 0.1X SSC bufferand exposed to phosphorimager screen for 2-4 h. Radioactive counts for each spot were quantified using Image Quant and Fuji Multi Gauge V3.0 software. Relative percentage intensity for individual spot was calculated with respect to allspots present oneach hybridizedmembrane
-
YPD-grown cultures (0.05 OD600) of each mutant pool (96 mutants, each carrying a unique signature tag) were either inoculated in YPD medium for overnight (input) or used to infect differentiated THP-1 cells (1X106). After 2 h incubation, non-cell-associated yeastcellswere removed by washing THP-1 cellsthricewith PBS. At
-
Single colony of C. glabratastrains wasinoculated in 10ml YPD-liquid medium and grown at 30°C with constant shaking at 200 rpm for 14-16 h. Overnight culture was used to inoculate 10 ml YPD broth to an initial OD600of 0.1 and culture was grown for 4-5 h to obtain log-phase culture. Log-phase C. glabratacells were harvested in 15 ml sterile polypropylene tubesby centrifugation at 4,000 rpm for 5 min. Harvested cells were washed with10ml sterile water,resuspendedin 1 ml sterile water and transferred to a 1.5 ml microcentrifuge tube. Cells were harvested at 4,000 rpm for 5 minand resuspended in 100 μl of100mM lithium acetate solution.Yeast transformation cocktail was prepared in a 1.5 ml microcentrifuge tube by mixing 240 μlpolyethylene glycol(50%), 36μl lithium acetate(1 M) and25μlheat-denatured single stranded carrier DNA(2 mg/ml). 50 μlC. glabratacell suspension and 50 μltransforming DNAwas added to the transformation cocktail, mixed well andincubatedat 30 ̊C for45 min. 43 μlDMSO was added and cells were subjected to heat shock at 42 ̊Cfor 15 min. After the heat shock, cells were transferred to ice for 10-15 seconds, centrifuged at 4,000 rpm for 5 min and supernatantwas removed.Cells wereresuspended in 200 μlsterile water andspread platedonappropriate selectionmedium. Plates wereincubatedat30 ̊Cfor 2-3 days
-
Identified mutants were phenotypically characterized in 96-well plate format. Mutant cultures were grown in YPD medium for overnight, diluted 150-fold in PBS and 5 μl of cell suspension was spotted on different plates with a 96-pin replicator. Growth was recorded after 1-2 daysof incubation at 30°C
-
at 30°C andimages were captured after 2-8daysof incubationdepending upon the medium used
-
Yeast strains were grown in YPD medium for 14-16 hat 30°Cunder continuous shaking at 200 rpm. Cells were harvested from 1 mlculture, washed with PBS and were diluted to an OD600of 1. Five ten-fold serial dilutions were preparedfrom aninitial culture of 1OD600.4 μl cultureof each dilution was spotted onYNB-agar plates containing different carbon sources. For spotting on YPD plates containing different compounds, 3 μl cultureof each dilution was spotted. Plates were incubated
-
For growth analysis of a C. glabratastrain,single colony wasinoculated in appropriate broth medium and grown for 14-16 h. Overnight grown culture was used to inoculate the test medium toan initial OD600of 0.1-0.3. Cultures were transferred to a shaker incubator set at 30°C and 200 rpm. Absorbance ofcultures was measured using Ultraspec 2100 pro UV/visible spectrophotometer (Amersham Biosciences) at 600 nm at regular time-intervalstill 48h. Absorbancevalues were plotted with respect to time and generation time was determined from the logarithmic (log)phase of cell growth usingthefollowing formula.G = Generation time (h)T1= Initial time point taken for analysisT2= Final time point taken for analysisNf= Number of cells at time T2(1 OD600of C. glabrata corresponds to 2 X 107cells.)Ni= Number of cells at time T1(calculated from OD600value as mentioned above)
-
C. glabratastrains were routinely grown either in rich YPD medium or synthetically-defined YNB medium at 30°C withcontinuous shaking at 200 rpm unless otherwise stated. In general, C. glabratafrozen glycerol stocks wererevivedonYPD medium by streaking and allowed to grow for 1-2 days. C. glabratastrainsharboringthe plasmid with URA3as selectable marker were revived onCAA medium.To prepare liquid cell culture, single colony of eachC. glabratastrainwasinoculated either in YPD or YNB broth mediumand grown for 14-16 h. C. glabratastrains streaked on plates were storedat 4°C fora maximum period of2 weeks
-
To collectmacrophage-internalized yeast cellsfor RNA and protein extraction, 107THP-1 monocytes were seeded in 100 mm cell culture dishes and treated with PMA. PMA-differentiated THP-1 macrophages were infected with appropriateC. glabratastrainsto a MOIof 1:1. Equal numberof C. glabratacells wasinoculated inRPMI medium as control. Two hourspost infection,non-phagocytosed yeast cells were removed by washing THP-1 macrophages thrice with PBS. At different time points, culture dishes were washed twice with chilled PBS and 2 mlchilled sterile water was added toeach dish to lyse the macrophages. Corresponding cultures grown in RPMI medium were transferred to50 ml polypropylene tubesand transferred on ice. Lysates were collected by scrapping the macrophage monolayer and transferred to50 ml polypropylene tubes.RPMI-grown and macrophage-internalized C. glabratacells were harvested by centrifugation at 2,500g for 8 min. Macrophage cell debris were removed frommacrophage-internalized cells by repeated washing with chilled sterile water. Harvested C. glabratacells were stored at -20ºC till further use
-
undertissueculture conditionsfor 45-60min andfixed in 3.7% formaldehydeas described earlier.For DAPI staining, Vectashield mounting medium containing DAPI was used and slides were visualized under confocal microscope.For heat killing, yeast cells were harvested from 1 ml culture, washed, resuspended inPBS andwere incubated at 95°C for 5 min
-
PMA-treated THP-1 macrophages were infected with C. glabratacells to a MOIof 1:1 in four-chambered slides and incubated at 37°C and 5%CO2. After 1 hcoincubation, each chamber was washed thrice with PBS to eliminate extracellular yeast cellsand medium was replaced with fresh prewarmed RPMI medium containing100 nM Lysotracker Red DND-99.Infected THP-1 macrophageswere incubated
-
For confocal microscopyanalysis, 5X105THP-1 cells were seeded and treatedwithPMA in 4-chambered slides. Differentiated THP-1 macrophageswere infected either with FITC-labeled or GFP-expressingC.glabratastrains to a MOIof 1:1. At different time intervals, medium was aspirated out from each chamber of 4-chambered slides and chamberes were washed twice with PBS. To fixthe infected macrophages,500 μlformaldehyde(3.7%) was added gently toeach chamber andincubated for 15 minat room temperature. Each chamber of the slide was washed twice withPBS to remove formaldehyde solution completely. To permeabilize the fixed cells, 500 μl Triton-X (0.7%) was dispensed toeach chamber and slide wasincubated at room temperature for 5 min. Chambers of the slide werewashed twice with PBS, separated from the slideusing a chamber removal device andwere air dried. Coverslips were placed onslides using Vectashield mounting mediumand bordersweresealed withnail paint. Slides werestored at 4°C until used forfluorescence imaging
-
THP-1 cells were seeded ina 24-well tissue culture plate to a celldensity of 1 million cells per well,treated with PMA and were infected with yeast cells to a MOIof 10:1. Two hours post infection, cells were washed thrice with PBS and medium was replacedwith fresh prewarmed RPMI medium.Plates wereincubatedat 37ºCfor 24 h. Supernatants were collected,centrifuged at 3,000 rpm for 5 minto get rid of particulate matter,if any, andwerestored at -20°C until use. Estimation of different cytokines wasperformed using BD OptEA ELISA kits as per the supplier’s instructions
-
Forinfection of THP-1 cells with single C. glabratastrain, PMA-treatedTHP-1 monocytes were seeded in 24 wellcell culture plate toa seeding density of 1 million cells per well. To prepare C. glabratacells for macrophage infection, single colony of the desiredstrain wasinoculated in YPD medium and allowed to grow for 14-16 hat 30°C. C. glabratacellsfrom 1ml overnight culture were harvested, washed with PBS andcell density was adjustedto 2X107cells/ml.50 μl of thisC. glabratacell suspension wasinfectedto macrophages to a MOIof 10:1. Two hours post infection, infected THP-1 macrophages were washed thrice with PBS to removenon-phagocytosed yeast cells and medium was replacedwith fresh prewarmed medium. Atdifferent time points post infection,infected THP-1 macrophages were washed with PBS three timesandlysed in 1 mlsterilewater. Lysates were collected by scrapping the wells with a micropipette tip, diluted in PBS and appropriatelysatedilutions were platedon YPD agar medium. Plates wereincubated at 30°C and colony forming units (CFU) were counted after 1-2 days. Final CFUs per ml were determined by
-
multiplying CFUs with dilution factor and fold-replication was determined by dividing the CFUs obtained at 24 h time-point by 2 h CFUs
-
THP-1 monocytes were treated with phorbol myrsitylacetate (PMA) to differentiate them to macrophages(Tsuchiya et al., 1982). For PMA treatment, THP-1 cells grown upto 70-80% confluencewere harvested from the culture dishes at 1,000 rpm for 3 min. Harvested THP-1 cells were resuspended in 5-10 ml fresh and prewarmed complete RPMI medium. 100μlof thiscell suspensionwasappropriatelydilutedinPBS and numberof viable cells was determined by trypan blue stainingusing hemocytometer. Cell suspension was diluted with prewarmed RPMI medium to a final density of 106cells/ml. PMA was added to this THP-1 cell suspension to a final concentration of 16 nM and mixedwell.PMA-treated THP-1 cellswere seeded either in 24-well cell culture plate or culture dishes and transferred to the incubator set at 37°C and 5%CO2.After 12 hincubation, medium was replaced with fresh prewarmed medium and cells wereallowed to recover for 12 h
-
weretransferred toa sterile 100 mm cell culture dishcontaining 11 mlfresh and prewarmed completemedium andculturedin tissue culture incubatorat37°C and 5% CO2.After 12hincubation, medium was replacedwith fresh prewarmed mediumand cells were allowed to proliferate till they acquire 80% confluence
-
Freezer stocks of THP-1 and Lec-2 cells were prepared either in commercial cell preservation medium (Gibco) or completemedium supplemented with 10%heat inactivated serum and 10% DMSO. For cryopreservation, 5-6 million cells were resuspended in 0.5 mlfreezing medium in 2 ml cryopreservation vials,stored in an isopropanol bath and were transferred to-70°C freezer. Aftertwo days, freezer stocks were transferred to liquid nitrogen containertill further use. To revive the cells, freezer stocks were taken outfrom liquid nitrogen container and transferred immediately to37°C water bath. After2-3 min, when freezing medium hadthawed completely,cells
-
To isolate primary peritoneal macrophages, 6-8 week old BALB/c mice were injected with 3% (w/v) thioglycollate broth (0.55% dextrose, 0.05% sodium thioglycollate, 0.5% sodium chloride, 0.05% agar)intraperitonealy (I.P. 50 μl/g body weight). After five days of injection, mice were euthanized by CO2inhalationand peritoneal macrophages were harvested byflushing the peritoneal cavity (lavage) with 10 mlDMEM medium(Zhang et al., 2008)
-
THP-1 andLec-2 cell lines were obtained from ATCC (American Type Culture Collection). THP-1 and Lec-2 cells were cultured and maintained in RPMI-1640 and α-MEM media,respectively, supplemented with 10% heat inactivated fetal bovine serum, 2 mM glutamine and antibiotics (100units/ml of penicillin and 100μg/ml of streptomycin). Both cell lines were maintained at 37°C and 5% CO2in Thermo-Scientific cell culture incubator. After every 2-3 days, spent medium was replaced with fresh,pre-warmed medium. For splitting the culture, cells were harvested at 1,000 rpm for 3 min. Spent medium was discarded and cells were resuspended in 4-6 ml fresh prewarmed medium. Finally, 3-4 million cells were resuspended in 12mlmedium in 100 mm culture dishes.Cellswere cultured and maintained in tissue culture incubatorat37°C and 5% CO2
-
Spheroplast resuspension buffer0.1M KCl15 mM HEPES (pH 7.5)3 mM Ethylene glycol-bis(2-aminoethylether)-N,N,N′,N′-tetraacetic acid(EGTA)10% GlycerolPhosphatidylinositol sonication buffer10 mM HEPES (pH 7.5)1 mM EGTA PI3-kinase reaction buffer40 mM HEPES (pH 7.5)20 mM MgCl280 μM ATP5 μCi γ-P32ATPDeveloping solution for thin layer chromatography(120.2 ml)Chloroform –60 mlMethanol –47 mlAmmonia –4.4 mlWater –8.8 ml
-
SDS-loading buffer was prepared as a 4X stock solutionin H2Oand used at a 1X concentration.SDS-PAGE running buffer0.25 M Tris-HCl (pH 8.0)1.92 M Glycine1% SDSRunning buffer was preparedas a 10X stock solution and diluted to 1X concentration before use.Buffers for Western blotanalysisTransfer buffer (10X stock solution)0.25 M Tris-HCl (pH 8.0)1.92 M Glycine1% SDSTransfer buffer was prepared as a 10X stock solution and diluted to 1X concentration.1X Transfer buffer (1 litre)200 ml of methanol100 ml of 10X transfer buffer700 ml of waterTris-BufferSaline (TBS)25 mM Tris150 mM NaClpH was adjusted to 7.4 with HCl.TBS buffer was prepared asa10X stock solution and diluted to 1X concentration.Blocking and wash buffers (PBS-T and TBS-T)5% Fat-free milk0.1% Tween-20Volume was made to 100 ml with 1X TBS
-
1 mM sodium orthovanadate1 X protease inhibitor cocktail SDS-PAGE30% Acrylamide solution29 g Acrylamide1 gBis-acrylamideDissolved in 100 ml H2O.10% Sodium Dodecyl Sulfate (SDS)10 g SDS in 100 ml H2OResolving gel mix (12%) (20 ml)6.6 ml H2O8 ml 30% acrylamide:bisacrylamide (29:1) mix5 ml 1.5 M Tris-HCl (pH 8.8)200 μl 10% SDS200 μl 10% Ammonium persulfate(APS)8 μl N,N,N′,N′-Tetramethylethylenediamine(TEMED)Stacking gel mix (5%, 6 ml)4.1 ml H2O1 ml 30% acrylamide:bisacrylamide (29:1) mix750 μl 1 M Tris-HCl (pH 6.8)60 μl 10% SDS60 μl 10% APS6 μl TEMEDSDS loading buffer130 mM Tris-HCl (pH 8.0)20% (v/v) Glycerol4.6% (w/v) SDS0.02% Bromophenol Blue2% DTT
-
Whole cell lysis buffer (Homogenizing buffer)50 mM Tris-HCl (pH 7.5)2 mM EDTA10 mM sodium fluoride
-
150 mM NaCl1% Triton-X1% SDSBuffer B50 mM Tris-HCl (pH 7.5)10 mM EDTA1.1 MSorbitol50 mM β-mercaptoethanol (To be added just before use)Buffer C100 mM Tris-HCl (pH 7.5)10 mM EDTA10% SDSAE buffer3 M Sodium acetate(pH 5.3)0.5 M EDTA (pH 8.0)Phenol:Chloroform:Isoamyl alcohol (25:24:1) solution25 ml Tris-equilibrated Phenol24 ml Chloroform1 ml Isoamyl alcholDNA sample loading buffer0.25% Bromophenol blue0.25% Xylene cyanol15% FicollDNA sample loading buffer was prepared in water
-
Buffer A50 mM Tris-HCl(pH 8)10 mM EDTA
-
Stripping solutionfor DNA1% SDS0.1% SSCDesired volume was adjusted with sterile water. Alternatively, 0.4 M NaOH was also used to stripthe bound probes fromnylon membranes.HEPES [4-(2-Hydroxyethyl)piperazine-1-ethanesulfonic acid] buffer1 M HEPESpH was adjusted to 7.5 with NaOH.HEPES was used as a buffering agent for preparing plates of YNB medium of different pH. Buffer was filter-sterilized and stored in an amber-coloured bottle.INOUE transformation buffer10 mM PIPES15 mM CaCl2.2H2O250 mM KCl55 mM MnCl2.4H2OpH was adjusted to 6.7 with 1 N KOH.Yeast transformation reagents1 M Lithium acetate 50% Polyethylene glycol2 mg/ml carrier DNADimethyl sulfoxide (DMSO)Zymolyase cocktail buffer for yeast colony PCR2.5 mg/ml Zymolyase1.2 M SorbitolZymolyase buffer was prepared in 1X PBS
-
pH was adjusted to 8.5 with glacial acetic acid.TAE buffer was prepared asa50Xstock solution and used at 0.5X concentration.Alkaline denaturing solution for DNAfor membrane preparation0.5 M NaCl0.25 M NaOHVolume was adjusted with sterile water.Denhardt’s solution (50X)1%Ficoll-4001% Polyvinyl pyrollidone1% Bovine serum albuminVolume was adjusted with water and solution was stored at -20°C.Saline Sodium Citrate (SSC) buffer(20X)3.0 M Sodium chloride0.3 M Sodium citrate Volume was adjusted with water and solution was sterilized by autoclaving.Prehybridization Buffer5X SSC5X Denhardt’s solution50% Filtered formamide1% SDSVolume was adjusted with sterile water.Post hybridization wash buffersWash buffer 12X SSC0.1% SDSWash buffer21X SSC0.1% SDS
-
Phosphate-Buffered Saline (PBS)137 mM NaCl2.7 mM KCl10 mM Na2HPO42 mM KH2PO4pH was adjusted to 7.3 before autoclaving.PBS was prepared as a 10X stock solution and diluted to 1X concentration before autoclaving.Tris-HCl buffer0.5 M Trizma BasepH was adjusted to 7.6 using concentrated HCl.Tris-Cl buffer was prepared as a 10Xstock solution and used at a 1X concentration.Tris-EDTA (TE) buffer10 mM Tris-HCl (pH 8.0)1 mM EDTATris-Acetic acid EDTA (TAE) buffer40 mM Tris base0.5 M EDTA
-
Luria Bertani (LB)0.5% Yeast Extract1% Tryptone1% NaClSuper Optimal Broth (SOB)0.5% Yeast Extract2% Peptone
-
Yeast extract Peptone Dextrose (YPD)1% Yeast extract2% Peptone2% DextroseYeast Nitrogen Base (YNB)0.67% Yeast Nitrogen Base2% DextroseFor alternate carbon source utilization experiments, dextrose was replaced withother carbon sourcesviz.,sodium acetate, ethanol, oleic acid, glycerol and citric acid.Yeast Nitrogen Base (YNB) without ammonium sulphate and amino acids0.17% Yeast Nitrogen Base2% DextroseCasamino Acid (CAA)0.67% Yeast Nitrogen Base2% Dextrose0.6% Casamino acidsFor preparing plates, 2% agar was added tothe medium before autoclaving
-
Table 2.4: List of the oligonucleotides used to confirm deletion of C. glabrataORFs
-
Table 2.3: List of the oligonucleotides used in the study
-
Table2.2: List of the antibodies used in the study
-
Table 2.1: List of strains and plasmidsused in the study
-
methanol, acetic acid, potassium dihydrogen orthrophosphate, dipotassium hydrogen phosphate, disodium hydrogen orthrophosphate, acetone and citric acid were purchased from Qualigen chemicals. Fluconazole was procured from Ranbaxy.Lysotracker-Red DND 99 and FM 4-64 were obtained from Molecular Probes. Hybond-N and Hybond-P membranes for nucleic acid and protein transfer, respectively, were purchased from Amersham Biosciences. SYBR-green kit for real-time PCR was procured from Eurogentech. Superscipt SS-III RT kit and Pfu polymerase were obtained from Invitrogen. Different restriction enzymes used for cloning and knock-out generation were purchased from New England Biolabs (NEB). High fidelity DNA Pfx polymerase waspurchased fromFinnzymes. Plasmid DNA purification, PCR purification, gel extraction and reaction clean up kits were procured from Qiagen.Medium components for C. glabrataand bacterial culture viz.,yeast extract, peptone, tryptone, cassamino acid hydrolysate, yeast nitrogen base, yeast nitrogen base without ammonium sulphate, yeast nitrogen base without ammonium sulphate and amino acids and yeast carbon basewere purchased from BD (Becton, Dickinson and Company, USA). Animal cell culture media RPMI-1640, DMEM and α-MEM were procured from Hyclone. Fetal bovine serum, glutamine and antibiotics for cell culture medium were obtained from Gibco-Invitrogen
-
Agarose, phenol, dimethyl sulphoxide (DMSO), sodium acetate, sodium chloride, sodium hydroxide, sodium carbonate, sodium bicarbonate, trizma base, sodium dodecyl sulphate (SDS), formamide, calcium chloride, ethylenediaminetetraacetic acid(EDTA), glycerol, polyethylene glycol, ficoll, diphenyleneiodinium (DPI), methyl methanesulphonate (MMS), camptothecin, hydroxyurea, ammonium persulphate, TEMED, acrylamide, bis-acrylamide, coomassie brilliant blue (CBB), chloroform, formaldehyde, glycine, lithium chloride, lithium acetate, menadione, isopropanol, phorbol myrsityl acetate (PMA), nuclease free water, wortmannin, bafilomycin-A, diethylpyrocarbonate (DEPC), orthrophenylenediamine (OPD), tween-20, acid washed glass beads, trypan blue, Taq DNA Polymease, trisodium citrate dihydrate and uracil were purchased from Sigma Chemicals. β-mercaptoethanol was obtained from GE Biosciences.Protease inhibitor tablets were procured from Roche. Dextrose, sucrose, agar, ammonium sulphate, potassium chloride, caffeine, magnesium chloride and sorbitol were obtained from Himedia.Hydrogen peroxide, hydrochloric acid, sulphuric acid,
-
Oligonucleotides used in this study were designed either by freely available online tool Primer 3 plus (http://www.bioinformatics.nl/cgi-bin/primer3plus/primer3plus.cgi/)or Generunner software. Oligonucleotides were commercially synthesised at MWG Biotech Pvt. Ltd., Bangalore, India. Oligonucleotides used in this study are listed in Table 2.3
-
All antibodies, their sources, clonality and dilutions used are listed in Table 2.2
-
All C. glabrataand bacterial strains and plasmids used in this study are listed in Table 2.1
Tags
- Md-2-Md-11-d
- Mt-2-d
- Md-2-Md-16-d
- Md-2-Md-4-d
- Md-1-Md-2-d
- Md-3-Md-9-d
- Md-3-Md-4-d
- Md-3-Md-11-d
- Md-3-Md-10-d
- Md-2-Md-3-d
- Md-3-Md-16-d
- Mt-5-Mt-2-d
- Md-2-Md-10-d
- Md-3-Md-14-d
- Md-3-Md-3-d
- Md-3-Md-1-d
- Md-2-Md-7-d
- Md-3-Md-7-d
- Md-3-Md-12-d
- Md-2-Md-2-d
- Md-1-Md-5-d
- Md-1-Md-8-d
- Md-2-Md-6-d
- Md-2-Md-5-d
- Md-1-Md-3-d
- Mt-6-Mt-2-d
- Mt-4-d
- Md-1-Md-6-d
- Mt-3-d
- Md-3-Md-8-d
- Md-3-Md-5-d
- Mt-6-Mt-4-d
- Md-2-Md-14-d
- Md-1-Md-9-d
- Mt-1-d
- Md-3-Md-15-d
- Md-2-Md-15-d
- Md-3-Md-6-d
- Md-2-Md-1-d
- Md-1-Md-4-d
- Md-2-Md-13-d
- Md-2-Md-9-d
- Md-1-Md-7-d
- Md-1-Md-1-d
- Mt-6-Mt-3-d
- Mt-6-Mt-1-d
- Md-3-Md-13-d
- Md-2-Md-8-d
- Md-3-Md-2-d
- Mt-5-Mt-1-d
- Md-2-Md-12-d
Annotators
URL
-
-
sg.inflibnet.ac.in sg.inflibnet.ac.in
-
The immunoblots were quantified by densitometry software ImageJ 1.17 developed by Wayne Rasband, NIH Bethesda, MD (http://rsb.info.nih.gov/nih-image).All experiments were done at least in triplicates and results were expressed as mean ±s.e.m. A two tailedStudent’s t-test was done in Graph pad to arrive at p values and differences were considered statistically significant when p-value was less than 0.05 (*p≤ 0.05), highly significant(**p≤ 0.01)andextremely significant (***p≤ 0.001)
-
competent cells pre-inoculum was prepared. A single bacterial colony was picked from LB agar plate that has been incubated for 16-20 hours at 37 °C and inoculated into 3 mlLB medium and incubated overnight at 37 °C temperature with 200 rpm shaking. 1% of this pre-inoculum was sub cultured in 100 ml LB-broth and incubated at 18 °C until OD 600 reached 0.5 -0.6 (approx.). Culture was kept on ice for 10 min. with constant shaking. Cells were pelleted by centrifugation at 2000xg/4°C/8 min. Pellet was resuspended in 40 ml of ice-cold Innoue buffer. Bacterial suspension was kept on ice for 30 min, re-spun at 2000 xg/4°C/8 min. Pellet was resuspended in 8 ml of TB buffer inwhich final concentration of DMSO was 7% and left on ice for 10 min. 100μl aliquots were made and snap frozenin liquid nitrogen and stored at -80 °C
-
All the salts (10 mM PIPES, 15 mM CaCl2.2H2O, 250 mM KCl,55 mM MnCl2. 2H2O) except MnCl2were dissolved in water and pH was adjusted to 6.7 with 1N KOH. MnCl2was dissolved separately in water. MnCl2was added drop wise while stirring (MnCl2if added directly will give a brown colour to the solution and precipitates;hence it needs to be dissolved separately). Solution was then sterilized by filteringand stored. To prepare
-
Of theligation mixture,2μl (of total volume of 10 μl reaction)was added to atube of 100μlultra competent DH5α bacterial cells and incubated in ice for 30 minutes. The tubewas quickly transferred to a water bath maintained at 42°C to give a heat shock for 90 seconds and again quickly transferred to ice. 1ml of LB broth was added to the tube and then incubated at 37°C for 1 hour. The bacterial cells were then pelletdownby centrifugation at 6000 rpm for 5 minutes and plated on LB agarcontaining appropriate antibiotic
-
A total of 100-200ng of DNA was used in each ligation reaction. Vector to insert ratio of 1:3 to 1:5was maintained. The reaction volume was generally maintained at 10μl containing 1μl of 10X ligation buffer (provided by the manufacturer) and 0.05 Weissunit of T4-DNA ligase. The reaction was carried outat 16ºC for 14-to 16-hrs or at room temperature for 4hours
-
Digested DNA fragments required for ligation were eluted from the agarose gel after electrophoresis. The gel was visualised over a UV illuminator and section of it containing the desired DNA fragment was carefully sliced out from the gel. The sliced agarose gel was then processed using commercially available gel elution kitsfor this purpose. The elution efficiency was checked by running a small aliquot of DNA sample on agarose gel
-
For restriction digestion(either single or double), 0.5 to 1μg of DNA was used in a reaction containing2 to 5units of commercially available restriction enzyme(s)and 5μl of the recommended buffer (suppliedas 10X concentrationsby the vendor)in atotal reaction volume of 50μl. The reaction mixture was incubated for 2 h or overnight at 37°C. The digested DNA fragments were then visualised by ethidium bromide staining after electrophoresis on agarose gels. Commercially available DNA size markers were loaded along with the samples to ascertain or estimate the sizes of the digestedfragments
-
Overnight grown bacterial culture (3ml)was pellet down by centrifugationat4ºC for10-min at 6000 rpm. The cells were re-suspended in 200μl of Resuspension solution(solutionI). 400μl of freshly prepared Lysissolution(solution II)was then added and mixed by gently inverting the tubesfor 4-6 times and allowed to lyse for 5 min at room temperature.The complete lysis was ascertained by uniformity and clarityof the contents. Subsequently, 400μl of Neutralization solution(solution III)was added and the tubes were inverted 4-6 timesand gently for homogeneous mixing followed byincubation for 5 min on ice. After centrifuging at 12,000 rpm for 15-min, supernatant was decanted into a fresh tube, and0.7 volume of iso-propanol was added.Theprecipitated nucleic acids were then recovered by centrifugation at 12,000 rpm for 30-min. The pellet was washed once with 70% ethanol, air-dried and re-suspended in 100μl of TE-buffer. It was treated with RNase at a concentration of 20μg/ml by incubating at 37ºC for 1hour. It was further extracted with an equal volume of phenol: chloroform: isoamyl alcohol (25:24:1) mixture. After centrifugation, the clear supernatant was used for recovering the nucleic acids. The nucleic acids were precipitated with 2.5 volumesof ethanolin presence of3 M sodium acetate. In case where high purity plasmid preparations are required (for transfection to cells) the plasmid isolation was carried out with the commercially available midiprep or miniprep kits following the manufacturer’s instruction. Plasmids were observed on 1% agarose gel
-
Automated DNA sequencing on plasmid templates or on PCR products was carried out with dye terminator cycle sequencing kits from Perkin-Elmer on an automated sequencer (model 377, Applied Biosystems), following the manufacturer’s instructions
-
Agarose gels were preparedby boiling appropriate amount of agarose in TAEbuffer. After dissolution, it was cooled and then poured in a casting tray containing a comb for desired number of wells. The gel was allowed to solidify and then shifted to horizontal electrophoresis tank containing TAE buffer. The DNA samples were mixed with appropriate volumes of 6X DNA loading dye, loaded on the gel andelectrophoresedat appropriate voltage and current conditions (generally 80 V,400 mA). The gel was stained in ethidium bromide solution(1 μg/ml)for 15-min at room temperature and visualisedby fluorescence under UV-light in a UV-transilluminator
-
2μg of total RNA was reverse-transcribed using SuperScript III Reverse Transcriptase which is a commercially available version of M-MLVRT with reduced RNase H activity and increased thermal stability.According to manufacturer’s protocol1μg of RNA,1μl oligo(dT)(500ng),1μl 10mM dNTPand nuclease freewater was added to afinal volume of 13μlin a PCR tube.Thismixture was then incubated at 65°C for 5 minutesin a thermo cyclerand then quicklytransferredtoicefor 1minute. To this 4μl of 5X first strand buffer 1μl of 0.1MDTTand1μl ofRNaseOUT (40U/μl) were added. Then contents were then mixed and 1μl (200 units/μl) of SuperScript III RT was added. Themixture was then incubated at 50°C for 60 minutesin a thermo cycler.Lastlythe reaction was stopped byincubating the mixture at 70°C for 15 minutes. The cDNA thus prepared was then usedas a template for PCR
-
The quantity and purity of nucleic acids was determined by measuring the absorbance at 260 and 280 nm. The concentration of nucleic acids was calculated by considering the OD (λ260)= 1 corresponding to50μg/ml DNA and 40 μg/ml ofRNA. The purity of nucleic acids was checked by their A260/A280 ratioconsidering 1.8 for DNA and 2.0 for RNA. These measurements were done in NanoDrop 2000 UV-Vis Spectrophotometer
-
Total RNA was isolated by TRIzol method using the manufacturer’s protocol. Briefly, medium was removed from culture dish and recommended amount of TRIzol wasadded directly on to the dish and kept at room temperature for 5 minutes for lysis of cells. The cellular homogenate was then transferred to a 1.5ml microcentrifuge tube. For each mlof TRIzol, 200μl of chloroform was added and tubes were shaken vigorously for 10 seconds to completely dissociate the nucleoprotein complexes, followed by vortexing for about 30 seconds. The mixture was kept for 3-5 minutes at room temperature and then centrifuged at maximum speed of 12,000 rpm for 10 minutes. The upper aqueous phase was transferred into a fresh micro centrifuge tube and RNA was precipitated by adding 500μl of iso-propanol. The RNA pellet was obtainedby centrifugation at 12,000 rpm for 30 minutes at 4°C. The pellet was washed with 1ml of chilled 70% ethanol followed by centrifugation at 12,000 rpmfor 5minutes. The supernatant was removed and the pellet air-dried for about 5 minutes. The pellet was resuspendedin 30-50μl RNase free deionisedwater and dissolved at 55ºC followed by quantificationusingnanodrop spectrophotometerfor further use.The RNA integrity was checked by evaluating the 18S and 28S rRNA signals by running 1μl of total RNA on denaturing agarose gel stained with ethidium bromide
-
Total RNA isolation from cultured cells
-
nvolved use of GFP based vector system, the expression of the transgene was visualized under fluorescent microscope with excitation filter of 485+20 nm
-
Transient transfection of plasmid DNA in cellswas performed usingLipofectamine 2000transfection reagentaccording to manufacturer’s protocol. Briefly, 0.5 to 1million cellswere seeded in a 35mm tissue culture dish one day prior totransfection. For each 35mm dish, 4μg DNA was mixed in 250μl of Opti-MEMin one polypropylene tube. In another tube 10μl of Lipofectamine 2000 was diluted in250μl Opti-MEM and incubated at room temperature for 5 minutes. DNA and Lipofectamine 2000 were mixed together and allowed to form complexes for 30minutes at room temperature. Meanwhile, the adherent cells were washed twicewithPBS and 1ml of Opti-MEM was added. 500μl of complexes were then added to each dishcontaining cells and medium. After 6-8 hrs, the medium containing complexes wasremoved and complete medium was added and transgene expression was evaluated 24-48 hrs after transfection. Since most of the experiments
-
Themixture is incubated in a water bath at 37⁰C for 15 min and afterwards transferred on ice and 4μl of DNA loading buffer is added. The samples were then run on a polyacrylamide gel electrophoresis which had been pre-run for 30 min. Electrophoresis was carried out at 4⁰C for 3h till the bromophenol blue migrated to 2cm above the bottom of gel. The gel was taken out and kept on Whatman filter paper sheet and covered by saran wrap followed by drying in a gel dryer at 80⁰C for 1h under suction. The dried gel was exposed to phosphoimager screen by keeping in phosphoimager cassette overnight
-
A binding reaction mixture was prepared by adding the following components to a microcentrifuge tube on ic
-
The reaction was carried out by incubating at 37⁰C for 30 min. The reaction was stopped by adding 2μl of 0.5M EDTA, pH 8.0 and keeping on ice. A spin column was prepared using 1ml syringe and packed with sterile Sephadex G50 slurry and reaction mixture is applied on the top. The eluate is collected in different microcentrifuge tubes and radioactivity was counted using Geiger counter. The tube showing 7 to 9X106was used for experiment. The column containing the unincorporated [γ-32P] ATP was discarded in radioactive waste bin. The radiolabelled oligonucleotides were annealed with their corresponding complementary unlabelled oligonucleotides. A 50 fold molar excess of the latter was used for annealing for conversion of labelled single strand to double strand. Thetubes were kept in boiling waterbath for 3 min followed by room temperature for 30 min. The tubes were transferred to ice and the oligonucleotides were diluted to 4fmoles/μl using sterile H2O
-
The oligonucleotides were labelled at their 5'end with 32P using T4 polynucleotide kinase (T4 PNK) enzyme in a reaction given belo
-
Adherent cells growing either on cover slips or chamber slides were fixed with 4% paraformaldehyde for 10 min at room temperature. The cells were washed with PBS thrice for 5 min each and blocking was done in 2% BSA(preparedin PBScontaining 0.3% Triton-X 100) for 1h.The cells were incubatedwith primary antibody(dilutedin PBScontaining 0.3% Triton-X 100)for 2h at room temperature or overnight at 4⁰C.The cells were washed with PBS thrice for 5 min each followed by incubation withAlexa Fluor 488-or 594-conjugatedsecondary (anti-mouse/rabbit) antibodiesfor 1h. Then the cells were mounted on microscopicslides using Vectashieldmountingmediumcontaining nuclear dye DAPI. Imaging was done byeither the laser scanning confocal LSM510 or LSM 750 (Carl Zeiss, Oberkochen, Germany) or fluorescence inverted (Olympus 1X51, Tokyo, Japan) microscope
-
Equal amount of proteins were loadedon an appropriate percentageof denaturing SDS-PAGE gel. After completion ofthe run, the gel was over laid on a PVDF membranecut to the size of gel and sandwiched between filter paper sheets and kept inthe blotting cassette in the presence of transferbuffer. Finally the cassette was put in themini transblotapparatus and blotting was done for 2-3hours at a constantvoltage of 80Vat 4⁰C. For blocking the nonspecific sitesmembrane was incubated with blocking solution(5% non-fat milk solution in TBST)with gentle shaking for 1 hourat room temperature. Excess milk from the membrane was washedoff with TBST and themembrane was incubatedwith primary antibody diluted in 1XTBST for 3 hours atroom temperature or overnight at 4°C withshaking. After incubation the membrane was washedwith TBST and incubatedwithappropriate secondary antibody (conjugated with horse-radish peroxidase)diluted in5% fat free milk solution (in TBST) for 1hat room temperature.The blotwas later washed thricefor 10min eachwith TBST and processed for the detection of proteinsignal using ECL-prime chemiluminescencedetection reagent followed by detectionof signal either on X-ray filmor in a chemiluminescence detectionsystem(Proteinsimple, California, USA)
-
BCA (Bicinchoninic acid) method was used to determine the proteinconcentrationin various samples. The Cu2+ions from cupric sulphate (present inBCA reagent B) reagent arereduced to Cu+by the protein in an alkaline medium. The cuprous ion (Cu+) then combines with BCA (present in BCA reagent A) to give a purple colour whose intensity is proportional to the amount of protein present in the samples. This intensity is measuredby colorimetry at 562 nm. BCA reagent was prepared by mixing reagent A with reagent B in avolumeratio of 50:1. A standard curve was generated using increasing concentrations of BSA (2-10μg) in a 25μl reaction, in a 96 well plate. Cell lysates were also dilutedto same volume in parallel wells. 200μl of BCA reagent was then added to each well and incubated at 370C for 30 minutes. The absorbance readings were then takenin a spectrophotometer at 562 nm. Total protein was quantified by calculation of the slopes of regression lines ofabsorbanceand BSA standards
-
For preparation ofcellular homogenate from adherent cell culture, the medium was first removed and cells were washed with ice cold 1X PBS. The cells were then scraped in 1X PBS and pellet down by gentle centrifugation (4000 rpm for 2 minutes) at 40C. Cell lysis buffer was then added to the cell pellets and lysis was allowed for 30 minutes on a rotor at 4⁰C. Post lysis, cellswere centrifuged at 13000 rpm for 10min at 4°C. The pellet was discarded and supernatantwascollectedas cell homogenate
-
drop wiseaddition and kept at 4⁰C for 24h. Cells were then washed with PBS and stained with DNA staining solutionat 370C in darkwith intermittent shaking. The DNA content of cells was measured by flow cytometryusing FACS-Aria (Beckton-Dickenson) at 695 ±20 nm using a 655 long pass filter.The DNA content was then analysed by FACSDivaor FlowJosoftwareto evaluate the various phases of cell cycle. The diploid 2N DNA content was referred as G1/G0 population and the 4N DNA content was referred as G2/M population. Cells with intermediary DNA content (between 2N -4N) content were considered as S phasecells and those below 2N DNA content as sub G0 cells
-
Thecells were collected at various time points by trypsinization, washed in phosphate buffered saline (PBS, pH 7.2) and fixed in chilled 70% methanol: ethanol (1:1) solution by
-
Cells were seeded in replicates of five @ 3X103cells per wellinfive different 96well cell culture platesand grown in complete media. The method described earlier was slightly modified and followed (Gillies et al., 1986). After every 24h of seeding, one plate was stained with 0.2% crystal violet in 2% ethanolfor 15 minutestill 4thday i.e. 96h.One plate was stained just after the cells get attached to use as 0h time point. Excess dye was removed from the plates by washing with ample amount of water. Crystal violet dye incorporated in the cells was extracted using 0.1% SDS solution by shaking for 10 minutes on a shaker. Absorbance of the extracted dye was then determined at 570 nm in a spectrophotometer. The experiment was repeated at least three times and the average absorbance was plotted for each time point to generate a growth curve
-
Table2.2: Cell types used in the present study
-
In the present thesis, various cell types were used for which the details are provided in the Table 2.2. SiHa, HeLa, HaCaT, U2OS, SaOs , A549,HPLD andHEK-293cells were grown in Dulbecco’s modified Eagle’s medium (HyClone, Thermo Scientific, Logan, Utah, USA) supplemented with 2 mM glutamine (Gibco BRL), 100 U/ml penicillin and streptomycin (Gibco BRL, Carlsbad, CA, USA), and 10% fetal bovineserum (Gibco BRL, Carlsbad, CA, USA) under humified conditions at 37°C and 5% CO2.Cells were grown in cell culture dishes till they attained 70% confluency. For sub culturing, these were then trypsinised using 0.05% Trypsin EDTA solution and incubated for 5 minutes at 370C for cells to be detached from surface. The detached cells were then collected by gentle tapping the dish and pipetting. Trypsin was then inactivated by addition of FBS containing culture medium, transferred to a 15 ml tube and centrifuged at 1500 rpm for 2 minutes in a hanging bucket centrifuge. The cell pellet was then resuspended in complete medium and counted in Neubauercell counting chamber. Viability of the cells was checked by trypan blue exclusion method.Appropriate number of cells wasthen sub cultured in fresh cell culture dishes with culture medium as per the experimental requirements
-
Malachite green reagent
-
Reaction Buffer
-
Cell lysis Buffer
-
DNA staining solution
-
Fixative
-
Inoue buffer
-
DNA loading dye
-
Agarose gel
-
TAE
-
Neutralization solution(Solution III)
-
Lysissolution(Solution II)
-
Resuspension solution(Solution I)
-
Binding Buffer (10X)
-
EMSA Buffer
-
Nuclear lysis buffer
-
Polydeoxy (Inosinate-cytidylate) (Poly dI-dC)
-
Nuclear extractionbuffer (without protease inhibitors)
-
Cytoplasmic extractionbuffer (without protease inhibitors)
-
Blocking buffer: 2% BSA
-
Permeabilization buffer: 0.2% Triton X100
-
Fixative : 4% Formaldehyde
-
Stripping Buffer
-
Blocking Buffer
-
TBST
-
Transfer Buffer
-
Running Buffer
-
Stacking and resolving AcrylamidegelsResolving gel (10 ml)
-
6X protein loading buffer (Laemmlibuffer)
-
Cell lysis buffer(RIPA Buffer)
-
Tris Buffered Saline (TBS)
-
Phosphate Buffered Saline (PBS)
-
Ammonium persulfate(APS)
-
Acrylamide (29:1)
-
Phenylmethylsulfonyl fluoride (PMSF)
-
Benzamidine
-
Aprotinin
-
Leupeptin
-
NP-40ComponentsFinal concentrationFor 10 mlNP-4010%1mlH2O9ml
-
Dithiothreitol (DTT)ComponentsFinal concentrationFor 5 mlDTT1.0M0.7725gH2Oq.s
-
Ethylenediamine tetraacetic acid (EDTA), pH 8.0ComponentsFinal concentrationFor 500 mlEDTA0.5M93.05gH2Oq.sThe pH is adjusted to 8.0 using 10M NaOH
-
Ethylene Glycol Tetraacetic acid (EGTA), pH 7.0ComponentsFinal concentrationFor 50 mlEGTA0.1M1.902gH2Oq.sThe pH is adjusted to 7.0 using 10M NaOH
-
Potassium Chloride (KCl)ComponentsFinal concentrationFor 100 mlKCl2M14.91gH2Oq.s
-
Sodium Chloride (NaCl)ComponentsFinal concentrationFor 100 mlNaCl5M29.22gH2Oq.s
-
Potassium Chloride (KCl)
-
HEPES pH 7.9ComponentsFinal concentrationFor 100 mlHEPES1M23.83gH2Oq.sThe pH wasadjusted to 7.9 using 10M NaOH
-
forpreparation ofregular buffers and solutions viz. Tris, Glycine, SDS, Sodium Chloride, Potassium Chloride, Disodium Phosphate,NP-40, Tween 20, TritonX100, Formaldehyde, Glycerol, Agarose, Acrylamide,Bis-Acrylamide,Ammonium per sulphate (APS), TEMED,BSA, Propidium Iodide, RNase Aetc. were obtained from Sigma(St Louis, MO, USA). PVDF membrane, X –ray films and western blotting detection reagent (ECL prime) were obtained from GE Healthcare (Little Chalfont, UK). Proteaseinhibitor tablets were obtained from Roche (Penzberg,Germany). Anti mouse and anti-rabbit secondary antibodies tagged to HRP (Horse radish peroxidise) were obtained from Bangalore Genei(Peenya, India). Secondary antibodies for Immunofluorescence (anti mouseIgGand anti rabbitIgG) conjugated to Alexa Fluor (488 and 594) from Molecular Probes, Invitrogen and Vectashield mounting medium with DAPI wasobtained from vector laboratories(Burlingame, CA, U.S.A).Antibodies from different sources were used in the present study. The list of different antibodies used in the present thesis is provided in Table 2.1.Table 2.1: List of antibodies used
-
Media for cell culture (DMEM and Ham’s F12) and foetal bovine serum (FBS) were obtained from Gibco, Invitrogen (Carlsbad, CA, USA). Cell culturereagents such asTrypsin, Phosphate Bufferedsaline (PBS), Antibiotics, Glutamine, etc. were also obtained from Gibco, Invitrogen (Carlsbad, CA, USA). Chemicals for cell culture experiments Aphidicholin, Nocadazole, Polybrene, and Puromycinwere obtained from Sigma (St Louis, MO, USA). Cyclosporine A, MTT (3-(4, 5-dimethylthiazolyl-2)-2, 5-diphenyltetrazolium bromide), wortmannin, UO126, SP 600125, cycloheximide, camptothecin, Tacrolimus/FK506 , Tween 20 and Malachite green were obtained from Sigma-Aldrich (St. Louis, MO, USA). Specific calcineurin substrate RII peptide, calmodulin, eIF-2α inhibitor salubrinal, MG-132 and caspase inhibitor z-VAD FMK were obtained from Calbiochem (San Diego, CA, USA). Cytotoxicity detection kit (LDH) was obtained from Roche Diagnostics, (Mannheim, Germany).Live /Dead cytotoxicity assay kit was obtained from Molecular probes, Life technologies, USA.Lipofectamine-2000 and Opti-MEM for transient transfections were also obtained from Invitrogen(Carlsbad, CA, USA).Growth media for bacteria (LB) was obtained from HiMedia laboratories (Mumbai,India). Enzymes used for recombinant DNA experiments (Restriction endonucleases, DNA ligase) were obtained from New England Biolabs (Ipswich, MA, USA). Markers for DNA and protein gels were from Fermentas (Vilnius, Lithuania). Various kits used for macromolecular isolation (Plasmid isolation kit-Mini and midi, Gel extraction kit, PCR purification kit, RNA isolation kit) were procured from Qiagen(Hilden, Germany) or HiMedia (India).Trizol reagent for RNA isolation was obtained from Invitrogen (Carlsbad, CA, USA). BCA protein estimation kit was from Pierce (Rockford Illinois, USA). Cell fractionation kit was obtained from Fermentas (USA). Kitfor TUNEL assay kit wasobtained from Invitrogen(Carlsbad, CA, USA). PCR reagents (PCR buffer, dNTPs, MgCl2, Taq DNA polymerase) were obtained from Fermentas. Polymerasefor long PCRs (AccuTaq) was obtained from Sigma. Reverse transcriptase (SuperScript III) was obtained from Invitrogen. Various chemicals required
Tags
- Mt-2-Mt-1-Mt-10-d
- Md-1-Md-2-d
- Md-2-Md-4-d
- Mt-2-Mt-7-Mt-3-d
- Md-3-Md-4-d
- Mt-2-Mt-4-Mt-1-d
- Mt-2-Mt-1-Mt-8-d
- Mt-2-Mt-8-Mt-3-d
- Mt-2-Mt-7-Mt-2-d
- Mt-2-Mt-3-Mt-5-d
- Mt-2-Mt-11-Mt-2-d
- Mt-2-Mt-3-Mt-7-d
- Md-2-Md-3-d
- Mt-2-Mt-8-Mt-1-d
- Mt-2-Mt-1-Mt-9-d
- Mt-2-Mt-1-Mt-1-d
- Md-3-Md-1-d
- Md-3-Md-3-d
- Mt-2-Mt-10-Mt-1-d
- Mt-2-Mt-3-Mt-4-d
- Mt-2-Mt-2-Mt-2-d
- Mt-2-Mt-1-Mt-12-d
- Mt-2-Mt-10-Mt-2-d
- Md-4-d
- Mt-2-Mt-11-Mt-3-d
- Mt-2-Mt-1-Mt-4-d
- Mt-2-Mt-3-Mt-6-d
- Mt-2-Mt-4-Mt-2-d
- Mt-2-Mt-1-Mt-13-d
- Md-2-Md-2-d
- Md-1-Md-5-d
- Md-2-Md-5-d
- Md-1-Md-3-d
- Mt-2-Mt-1-Mt-6-d
- Md-1-Md-6-d
- Md-3-Md-5-d
- Mt-2-Mt-6-Mt-1-d
- Mt-2-Mt-1-Mt-5-d
- Mt-2-Mt-6-Mt-4-d
- Md-1-Md-9-d
- Md-1-Md-8-Md-1-Md-15-d
- Mt-2-Mt-6-Mt-2-d
- Mt-1-d
- Mt-2-Mt-3-Mt-2-d
- Mt-2-Mt-5-Mt-2-d
- Md-3-Md-6-d
- Mt-2-Mt-6-Mt-3-d
- Mt-2-Mt-1-Mt-3-d
- Md-2-Md-1-d
- Md-1-Md-4-d
- Mt-2-Mt-5-Mt-1-d
- Mt-2-Mt-9-d
- Mt-2-Mt-3-Mt-3-d
- Mt-2-Mt-11-Mt-1-d
- Md-1-Md-7-d
- Mt-2-Mt-3-Mt-1-d
- Md-1-Md-1-d
- Mt-2-Mt-8-Mt-2-d
- Mt-2-Mt-3-Mt-8-d
- Mt-2-Mt-1-Mt-2-d
- Md-3-Md-2-d
- Mt-2-Mt-1-Mt-7-d
- Mt-2-Mt-1-Mt-11-d
- Mt-2-Mt-2-Mt-1-d
- Md-1-Md-8-Md-2-d
- Mt-2-Mt-4-Mt-3-d
- Mt-2-Mt-7-Mt-1-d
Annotators
URL
-
-
shodhganga.inflibnet.ac.in shodhganga.inflibnet.ac.in
-
All data were presented as mean ± standard deviation (SD)/standard error of mean (SEM) fromthree independent experiments. Statistical analysis was performed using Student's t-test and one-way ANOVA followed by a post hoc Tukey testwherever applicable. Results were analyzed and illustrated by SPSS statistical software package (SPSS for Windows,version 16). Comparisons are done within and between the test groups (i.e.,parentalcells and profilin-stable cells). Asterisk (*) symbol indicates statistical difference between parentaland profilin-stable cells, whereas Number (#) and Dollar ($) signsindicatestatistical difference within parentaland profilin-stable cells, respectively. Significance of results was determined as p ≤ 0.01 and p ≤ 0.05(*indicates p ≤0.05, **indicates p ≤0.01, *** indicates p ≤0.001 and **** indicates p ≤0.0001
-
AutoDock tools 1.5.6 (Morris et al., 2009) and PyMOL (Sanner, 1999) was used to prepareand analyze the docking simulations.Preparation of protein structures for docking:The three dimensional structure of PTEN (PDB ID: 2PBD) (Lee et al., 1999)and profilin-1 (PDB ID: 1D5R) (Ferron et al., 2007)were obtained from protein data bank, PDB (www.rcsb.org).Prior to initiating the docking simulations, all non-protein molecules were removed from the intact PTEN and only the chain P was retained. In the same way, we retained (‘chain A’) for profilin-1. All the non-protein molecules were removed usingChimera(Pettersen et al., 2014).Protein PTEN was used as receptor and profilin-1was used as ligand. Kollman united atom charges and polar hydrogen were added to the receptor protein. Receptor protein was kept rigid in docking process, assuming there is no induced conformational change upon ligand binding. In contrast to the protein, torsional flexibility was permitted for the ligands via the side-groups and backbone of protein was kept rigid.Atomic affinity and electrostatic potentials were computed for a grid boxand positioned around the approximate centre of the binding site. The grid box size was set at 58.0 X 76.0 X 58.0 Å (x, y, and z) with the spacing between grid points at 1 Å and the center at 36.253 X 82.395 X 31.728 for x, y and z coordinates, respectively. All other docking parameters remained as the Autodock default settings.Analysis of docking data:AutoDockVina (Trott and Olson, 2010) software was used for docking simulations. The resulting docked conformations were clustered into families of similar conformations, with the root mean square deviation (r.m.s.d.) clustering tolerance of 2.0 A ̊. As a rule, the lowest docking-energy conformations were included in the largest cluster. The process was repeated for each remaining conformation, until all the conformations belonged to a single cluster. A new reference conformation was defined every time a new cluster was created. Following this, the best-docked conformation is selected as the lowest energy pose in the most populated cluster, i.e., the cluster with the highest convergence out of the 100 trials. This differs from the practice of simply choosing the overall lowest energy pose. Thus, we avoid picking lower energy ranked poses belonging to sparsely populated clusters, which can be considered as ‘chance-hits’ given that the docking algorithm was unable to converge to similar poses in other independent trials
-
The highly efficient Ultra competent DH5α cells for transformation were prepared by Inoue method (Inoue et al., 1990). Briefly, a single bacterial colony was picked from LB agar plate, inoculated into 10 ml LB medium and incubated overnight at 37°C temperature with 200 rpm shaking. Following day, 1% of the pre-inoculum was sub-cultured in 100 ml LB-broth and incubated at 18°C until OD600 of 0.5-0.6 was reached. Culture was then kept on ice for 10 min with constant shaking. Cells were pelleted by centrifugation at 5000 rpm at 4°C for 10 min. Pellet was resuspended in 40 ml of ice-cold Inoue buffer. Bacterial suspension was kept on ice for 30 min, re-spun at 2000g at 4°C for 10 min. Pellet was resuspended in 8 ml of TB bufferin which 560 μl DMSO was added and left on ice for 10 min. Finally, 100 μl aliquots were made by snap freezing in liquid nitrogen and stored at -80°C
-
In a typical ligation reaction, a total of 100 ng of vectorwas usedwhereas;theconcentration of insert varies from 300 to 500 ng. For10μlreaction volume, 1μlligation buffer (provided by the manufacturer) and 0.5μlof T4-DNA ligasewere added in vector-insertmixture. The reaction was maintainedat 16oC for 14-16h.After ligation, 2μl of the ligation mixture (of total volume of10 μl reaction) was added to a vial of ultra-competentDH5α bacterial cells and incubated in ice for 30 minutes. The ligation mixture was allowed toheat shock at 42oC for 90 seconds followed by quick transfer onice. About1ml of LB broth was added to the tube and incubated at 37oC for 1 hour. The bacterial cells were then pelleted by centrifugation at 6000rpm for 5 min and plated on LB plate containing appropriate antibiotic
-
For construction of desired clones, 1-2 μg of DNA was used for restriction digestion. In a typical reaction, 2-5units of restrictionenzymeswereused in the total reaction volume of 50μl along with5μl ofrecommended buffer (supplied as 10X digestion buffer). The reaction mixture was incubated for 3-5 hat 37oC. The digested DNAwasthenloaded along with DNA size marker and separated on agarose gel electrophoresis. The gel was visualized over a UV illuminator and section containing the desired DNA fragment was carefully sliced out. The sliced agarose gel was then processed using commercially available Gel Extraction kit (Qiagens) for this purpose
-
Plasmid DNA was isolated from10-100ml of bacterial culture grown overnight by using commercially available Miniprep or Midiprep kits (Invitrogen) as per manufacturers’protocol. Briefly, bacterial cells werepelleted by centrifugation at 6000 rpmfor10 min.The pelleted cells werere-suspended in 300μl-4ml of resuspensionsolution containing RNase H.About300μl-4ml of alkaline lysis solutionwas then added and mixed by gently inverting the tubesuntil clear and uniform lysatewas appeared. Subsequently, 350μl-5mlof neutralizing solutionwas added,the tubes were inverted repeatedly and gently to ensurehomogeneous mixing, followed by incubation for 5 min on ice. After centrifuging at 12,000 rpm for 15 min, supernatant was passed through commercially supplied filter columns by either gravity flow or high-speedcentrifugation. During this step, plasmid DNA binds to the column and was recovered by passing elution buffer through the column. The plasmid DNA present in the elution buffer was collected into a fresh tube and 70%(w/v)of iso-propanol was added.Theprecipitated nucleic acids were then recovered by centrifugation at 12,000 rpm for 30 min. The pellet was washed once with 70% ethanol, air-dried and re-suspended in desired amountof TE-buffer. Finally, the purity of plasmid wasobserved on 1% agarose gel
-
Automated DNA sequencing on plasmid templates or on PCR products was carried out with dye terminator cycle sequencing kits from Perkin-Elmer on an automated sequencer (model 377, Applied Biosystems), following the manufacturer’s instructions
-
For preparing agarose gels,appropriate amount of agarose(0.8-2%) was dissolved by boilingin TAEbuffer, until clear slurry was formed.It wasthen poured in a casting tray containing a comb for desired number of wells. The gel was allowedto solidify andshifted to horizontal electrophoresis tank containing TAE bufferwith 1 μg/ml ethidium bromide. Appropriate volumesof 6X DNA loading dye were added in the samples and subjected to electrophoresis atconstant voltage (generallyat80 V), along with appropriate DNA ladder,untilband were resolved. The gel was visualised underUV-light in a Gel-Doc or UV-transilluminator
-
The quantityand purity of nucleic acids weredetermined by measuring the absorbance at 260 and 280 nmusing automated NanoDrop instrument. The concentration of nucleic acids was calculated by taking 1 OD at 260nm = 50μg/ml for DNA and 40 μg/ml for RNA. The purity of nucleic acids was checked by their A260/A280 ratio
-
The reaction mixture was then placed on a thermo-cycler with the required cycling conditions for amplification of the desired gene, as described in Table 2.7. The amplified products were purified by PCR purification kit (Qiagen) and either quantified by spectrometry or separatedby agarose gel electrophoresis.Table2.7:Cycling conditions for PCR
-
The PCR amplification of desired genes werecarried out using Taq polymerase reaction kit obtained from Fermentas.Typically, a reaction mixture containing primers with plasmid containing geneof interest or c-DNA was prepared as described in Table 2.6. Table2.6: Various components of PCR reaction mix
-
Total RNA, isolated by TRIzol method was reverse transcribed into cDNA by One step Access RT-PCR kit (Promega, Madison, WI), as per manufacturer’sprotocol.Briefly, 1 μg of RNA, 1 μloligo-dT(500ng), 1 μl 10 mMdNTP and nuclease free water was added in a PCR tube. This reaction mixture was incubated at 65°C for 5 minutes in a thermo cyclerand then quickly transferred to ice. To the mixture, 4μl 5X firststrand buffer, 1μl 0.1M DTT,1μlRNase-OUT (40U/μl) and 1 μl (200 units/μl) of SuperScriptIII were added.The contents were mixed by gentle vortexing and incubated at 37°C for 60 minutes in a thermo cycler. Finally,the reaction was stopped by increasing the temperature to72°C for 10minuteson thermo cycler. The cDNA thus prepared, wasused as a template for PCR.PCR was then performed for either amplification of the gene of interest or relative expression of desired genes by the using gene specific primers(Table 2.5). Products were separated by agarose gel electrophoresis (2%) and visualized by ethidium bromide staining.Table2.5: List of RT-PCR primersused in the study
-
Total RNA was isolated from the treated cells usingTRIzol method, essentially described by Donald and his co-worker (Donald et al., 2010).TRIzol is a single-phase solution of guanidinium isothiocyanate and phenolthat can concomitantly denature proteins and other biological material. Addition of chloroform to this leads to phase separation: proteins remains in organic phase whereas, DNA and RNA resolves to interphase and aqueous phase, respectively. Before starting the experiment, area was sanitized with RNAZap toremove any contamination of DNases. After treatment, culture media was gently removed from the dish without disturbing the cell monolayer. TRIzolreagentwas added directly on to the dish andcellswere allowed tosuspend in it by repeated pipetting. The cellular homogenate was then transferred into amicrofuge tubes. For each ml of TRIzolused, 200μl of chloroform was added andvortexedfor about 30 seconds, followed bycentrifugation at maximum speed of 13,000 rpm for 10 minutes. The upper aqueous phase wastransferred into a fresh micro-centrifuge tube and 500μl of ice-cold iso-propanol was addedto precipitate RNA.The RNA was pelleted by centrifugation at 13,000 rpm for 30 minutes at 4°C. The supernatant was decanted and the pelletwas allowed towash with 1ml of ice-cold 70% ethanol followed by centrifugation at maximum speed for 10 minutes. Finally, the supernatant was removed and the pellet was allowed toair-dryfor about 5-10 minutes and solubilized in 50μl RNase free deionized (DEPC-treated Milli-Q) water and quantified by spectrophotometry for further use
-
Table 2.4: List of double-stranded oligonucleotides used in the present study
-
The DNA-protein complexes were then separated from free oligonucleotides on 6.6% native PAGE gel. The samples were loaded into a native PAGE gel, which was pre-run at constant current (40-50 mA) for 15-30 minutes. Electrophoresis was performed at constant current (80-100 mA), till the bromophenol blue dye front reached 1-2 cm from bottom of the gel. The glass plate was carefully removed without disturbing the gel and the Whatmann filter paper no. 3, cut to the size of the gel, and wasplaced over it. The paper was pressed gently and the gel, which was now firmly stuck on the paper, was covered with saran wrap and kept for vacuum drying on the gel-dryer at 80oC for 1 h. After drying, gel was exposed on a Phospho-imager screen for 12-24 h and scanned on Phospho-imager to detect the band of interest.To determine the specificity of the transcription factor binding or sub-unit interacting to the desired oligonucleotide, super-shift assay was performed. For this, 8-10 μg of nuclear extracts were first incubated with desired antibodies (concentration varies for different) or their isotype control for 1h at 25°C, followed by incubation with binding reaction mixture. The various oligonucleotide sequences used in the present study are listed in Table2.4below
-
For detection of protein-nucleic acid interaction, an electrophoretic mobility shift assay (EMSA) was conducted as described by Hellman and Fried (2007). Breifly, 8-10 μg of nuclear extract protein was incubated with binding reaction-mixture containing either 32P end-labeled double-stranded oligonucleotides (NF-κB, AP-1, p53 or SP-1) or unlabeled oligonucleotide as shown in table 2.3. The reaction mixture was incubated at 37°C for 45-60 min. After completion of reaction, 6μl of 6X DNA-loading dye was added and mixed well by gentle tapping.Table 2.3: Binding conditions for DNA-protein complexes in EMSA
-
The mixture was then incubated at 37oC for 45 min to radiolabel the oligonucleotide. Simultaneously, the Sephadex G-50 column was prepared in 1 ml syringe. The reaction mixture was loaded on the column and the eluting fractions were collected in the microfuge tube by loading 200 μl milli-Q water on the top of the column. After collecting 5-6 fractions, the tubes were analysed using a GM counter for the amount of radioactivity. The fractions having specific activity between 3.5-4.5 X 106cpm/pmoles were pooled. To this, 100 pM of the complimentary strand of the oligonucleotide was added and heated at 95°C for 5 minutes. The mixture was allowed to annealat room temperature for 1 h and further used in Gel shiftassay
-
The oligonucleotides of different transcription factors such as NF-B, AP-1, p53 and SP-1 were 5′-end labelled using radioactive γ32-ATP (obtained from BRIT, BARC, Mumbai, India) and Polynucleotide kinase, as per manufacturers’ protocol. The reaction mixture containing the different components, described in the table 2.2below was added in a microfuge tube.Table 2.2: Various components of oligonucleotide labeling reaction mixture
-
and stained with ‘Live & Dead’ cell assay reagent (5 μM ethidium homodimer, 5 μM calcein-AM) for 30 min at room temperature. Red (as dead) and green (as live) cells were analyzed under a fluorescence microscope (Labophot-2, Nikon, Tokyo, Japan).For flow cytometry, cells were transiently transfected with either empty vector or various constructs. After 12 h, cells were treated with a combination of CHX (cycloheximide, 25 μg/ml) and TNF (5 nM) for 24 h. Cells were washed, trypsinised and then subjectedto flow cytometry (FACS Aria, BD Biosciences) using Live-Dead Cytotoxicity assay kit (Invitrogen). Live versus dead cells were analysed using FlowJo software
-
Cytotoxicity assay: The drug-induced cytotoxicity was measured by the 3-(4,5-Dimethylthiazolyl-2)-2,3-diphenyltetrazoliumbromide (MTT) assay as essentially described by Mosmann et al., 1983. Briefly, 5x104cells/well were seeded in 96-well plate. After 12 h, cells were treated in triplicates with different agents for different concentrations and time (in a final volume of 100μl). After completion of treatment, 25 μl of MTT solution (5 mg/ml in PBS) was then added and incubated for 2 h. The cytotoxicity was evaluated by uptake and cleavage of yellow MTT dye to purple formazan crystals by dehydrogenase activity in mitochondria of the living cells. Thereafter, 100 μl of extraction buffer (20% SDS in 50% dimethlylformamide) was added. After an overnight incubation at 37ºC, the absorbance at 570 nm was measured using 96-well multiscanner autoreader(Bio-Rad) with the extraction buffer as blank. Absorbance values were normalized to untreated cells and represented in percent cell viability for different concentrations or treatments.Determination of nuclear fragmentation: The morphology of live and dead cells was observed by staining the nucleus with DNA intercalating dye, propidium iodide (PI).Briefly, cells were treated with several apoptotic inducers for different concentration or time. Thereafter, cells werewashed with PBSand fixed in ice-cold 80% methanol for overnight at 4°C. Following day,cells were washed and suspended in 100 μl of PI solution (0.1% Triton, 0.2 mg/ml RNase A and 50 μg/ml PI in PBS) for 30 min in dark. Cells were then mounted on slides and viewed under fluorescence microscope (in 560 nm filter) to determine morphology of intact or fragmentednucleus.Live &dead assay: The cytotoxicity of various drugs was determined using the commercially available Live/Dead assay kit (Molecular Probes, Eugene, OR). Live cells have intact membraneand active cellular metabolism,which allow Calcien-AM to permeate inside and get cleaved into green fluorescent compound, Calcein (ex/em ~495 nm/~515 nm) due to intrinsic cellular esterase activity. On the other hand, Ethidium homodimer-1 (EthD-1) enters cells with damaged membranes and undergoes a 40-fold enhancement of fluorescence upon binding to nucleic acids, thereby producing a bright red fluorescence in dead cells (ex/em ~495 nm/~635 nm). Hence, the cell viability can be assayed by either flow cytometry or fluorescence microscopy.For imaging, cells with different drugs treatments were washed with PBS
-
Secretory alkaline phosphatase (SEAP) assay: For SEAP assay, the culture supernatant was analyzed for SEAP activity essentially as per the Clontech kit protocol (Palo Alto, CA). Briefly, cells were transiently co-transfected with Lipofectamine 2000 transfection reagent, 0.5 μg of required plasmid DNA(s) with the protein of interest or empty vector, 0.5 μg of reporter plasmid containing NF-κB binding site cloned upstream of heat-stable SEAP (designated asNF-κB-SEAP)and 0.5 μg of green fluorescence protein (GFP) expression plasmid (Clonetech) in Opti-MEM media.After 6 h of transfection, cells were washed and cultured for 12 h in complete media, followed by treatment with different inducers. GFP positive cells were then counted to ensure similar transfection efficiency. At the end of treatment, cell culture-conditioned medium was harvested and 25 μl of medium was mixed with 20 μl of 5X buffer (0.5 M Tris, pH 9 and 0.5% bovine serum albumin) in a total volume of 100 μl in a 96-well plate followed by incubation at 65°C for 30 min. The plate was chilled on ice for 2 min and 50 μl of 1 mM 4-methylumbelliferylphosphate (MUP, substrate) was added to each well and incubated at 37 °C for 2 h. The activity of SEAP was assayed on a 96-well fluorescent plate reader (Fluoroscan, Lab Systems, MA) with excitation set at 360 nm and emission at 460 nm. The average number (± SD) of relative fluorescent light units for each transfection was then determined and reported as fold activation with respect to empty SEAP-transfected cells.Luciferase (Luc) assay:The cell pellet was lysed and extract was analysed as per Promega kit protocol.Briefly, cells wereco-transfected with Lipofectamine with 0.5 μg of reporter plasmid containing p53 binding site cloned upstream of luciferase (designated as p53-luciferase) and 0.5 μg of GFP constructs. After 6 h of transfection, cells were washed and cultured for 12 h, followed by treatment with different inducers of apoptosis. GFP positive cells were then counted.Cellswere pelleted down and lysed using the lysis buffer. The samples were freeze-thawed twice by storing them at -70oC to ensure total lysis. The supernatant,obtained by centrifuging the same at 11,000 rpm for 2 min was transferred to a fresh tube. About 100 μl of the substrate (Firefly luciferin, Promega) was added to the supernatant and light emission wasmeasured in luminometer by using a delay time of 2 sec andread time of 10 sec.The values were calculated as fold of activation over vector-transfected value
-
Uniquitination assay was performed as described by Choo and Zhang, 2009. Ubiquitination is an enzymatic process of the covalent attachment of polypeptide ubiquitin on specific lysine residuesof protein, which is thendegraded by proteasome complex. MG132 (carbobenzoxy-Leu-Leu-Leucinal), a proteolytic activity inhibitor of proteasome complex, is widely used to assess the stability of protein in vivo. Briefly, parental and profilin-stable cells were treated with 10 μM MG132 for 6 h. The whole cell extracts prepared in NTEN lysis buffer were then subjected to immunoprecipitation with anti-ubiquitin antibody. The analysis of ubiquitination was performed by immunoblotting with anti-PTEN antibody
-
Retroviral based system was used for silencing of PTEN. BOSC23 packaging cells were grown in 100 mm culture dishes upto 80-85% confluency. Retroviral RNA vector containing either scrambled control shRNA or pool of PTEN shRNA along with a PCL-Ampho helper plasmid were co-transfected using Lipofectamine 2000 reagent to generate viral particles. After 48 h, supernatant containing viral particles were used to infect MDA-MB-231 cells in the presence of polybrene (8g/ml). For p53 gene knockdown, TP53 mission shRNAs obtained from Sigma Aldrich (St Louis, MO, USA) were transfected using Lipofectamine 2000 (Invitrogen, USA) and non-targeting shRNAs (Sigma) were used as controls. The cellular homogenates were prepared 36-48 h post transfection and were subjected to immunoblotting to check the levels of protein knockdown
-
CHX pulse chase assay was performed as essentially described by Zhou (2004). Cycloheximide (CHX), a protein biosynthesis inhibitor was used to determine the half-life and stability of protein of interest. CHX blocks translation elongation step, thereby halting the synthesis of new proteins and therefore, time course degradation of protein can be studied. Briefly, parental and profilin-stable cells were seeded in 35 mm culture dishes and treated with CHX (50 μg/ml) the following day. Cells were harvested at different time points and level of protein was determined by immunoblotting
-
Immunofluorescence assay was carried out as described by Bhattacharyyaet al., 2010.Adherent cells weregrown either on cover slips. After treatment, cells were fixed with 3.7% paraformaldehyde solution in PBS for 15 min and permeabilised with 0.5% Triton X-100 at room temperature for 10 min, followed by blockingin PBS containing 2% BSA for 1h. Post blocking, cells were incubated with a primary antibody in PBS (1:200 to 1:500) for 2 h. After washing, cells were incubated with fluorescent-conjugated secondary antibodyin PBS(Alexa Fluor 488 or 594 goat anti-rabbit or antii-mouse, 1:1000) for 30 min. After final wash with PBS, nuclei were counterstained with DAPI containing mounting medium (Vectashield, USA). All the steps were performed at room temperature, unless otherwise stated. Images were obtained using either the laser scanning confocal LSM510 (Carl Zeiss, Oberkochen, Germany) or fluorescence inverted (Olympus 1X51, Tokyo, Japan) microscopes
-
Co-Immunoprecipitation assays were performed essentially as described by Lee (Lee, 2007). For a typical immunoprecipitation assay, cells were washed with ice-cold PBS and scapped in ice-cold microfuge tube. Then, cells were lysed with NETN buffer (containing 1 μg/ml each of leupeptin, aprotinin, 10mMeach ofNaF and phenylmethylsulfonyl fluoride (PMSF))on shaking rotator in cold room for 30 min. After centrifugation, the whole cell lysate (500 μg-1 mg) obtained was incubated with 1 μg of antibody of interest(orwithisotype control)on shaking rotator in cold room for 3 h, followed by addition of 10-20 μl of ProteinSepharose A/G beads (Santa Cruz) for 1 h. The immuno-complexes bound to beads were then pelleted atlow speed centrifugation (2500 rpm for 3 min) and washed three times with NETN buffer. The proteins bound to beadswere resolved by SDS-PAGE and immunoblotting was performed accordingto standard protocol described earlie
r
-
in 5% fat free milk solution in TBST (1:7000) for 45 min at room temperature and then washed thrice.The detection of signal was performed with ECL detection reagent (Amersham Biosciences) followed by detection of signal either on X-ray film (Hyperfilm-ECL, Amersham Biosciences)or in a chemidoc system (Proteinsimple, California, USA).The blot was reprobed with anti-tubulinor anti-GAPDHantibody to ensure equal loading of extracted protein
-
Materials and Methods472.2.7 Estimationof protein concentration in cellular lysatesBradford method(Bradford, 1976)was used to determine the quantity of protein in various samplesin a 96-well plate. Bradford’s reagent was prepared by diluting Bradford dye with water in the ratio of 1:5.For estimating the concentration of protein in a particular sample, 50μl volume reactionwas set and200μl of freshly prepared Bradford’s reagent was added. The complex givesa purplish colorwhose intensity is proportional to the amount of protein present in the sample. A standard curve was also generated using increasing concentrations of BSA (50 μg/ml, 100 μg/mland 200μg/ml).Cell lysatesof test samples werediluted to1:50 in the same volume.Each sample (including blank and standards) was taken in duplicates.The concentration of protein was measuredusing the ELISA reader at 570 nm. The unknown protein concentration (X) was calculated as follows:where,OD1& OD2: Optical densities of Standard (Std) 1 & Standard (Std) 2, respectively.BSA: Bovine serum albuminX×50 (dilution factor)/1000 = YConcentration of unknown protein (μg/μl) = Y × OD2.2.8 Immunoblotting(Western Blotting)Immunoblotting was performed as essentailly described by Lee (Lee, 2007). Equal amounts of protein were resolved on a denaturating SDS-polyacrylamide gel (8-12%). After completion of the run, the gel was transferred onto PVDF membrane and placed in the blotting cassette. The cassette wasthenput intothe mini transblot apparatus and transfer was done for 2-3 hours at a constant voltage of 80 V, depending on the size of the protein. Post transfer, membrane was rinsed in TBS containing 0.1% Tween-20 (TBST) and blocked with 5% non-fat milk in TBST for 1 h at 37ºC,on a gentle shaking rotator. After blocking, membrane wasrinsed thrice in TBST and incubated with primary antibodydiluted in TBST (ranging from 1:1000 to 1:10000, depending upon antibody used) for either3h at room temperature or overnight in the cold room.The membrane was then washed thrice with TBST and incubated withhorseradish peroxidase(HRP)-conjugated secondary antibody diluted
-
Bradford method(Bradford, 1976)was used to determine the quantity of protein in various samplesin a 96-well plate. Bradford’s reagent was prepared by diluting Bradford dye with water in the ratio of 1:5.For estimating the concentration of protein in a particular sample, 50μl volume reactionwas set and200μl of freshly prepared Bradford’s reagent was added. The complex givesa purplish colorwhose intensity is proportional to the amount of protein present in the sample. A standard curve was also generated using increasing concentrations of BSA (50 μg/ml, 100 μg/mland 200μg/ml).Cell lysatesof test samples werediluted to1:50 in the same volume.Each sample (including blank and standards) was taken in duplicates.The concentration of protein was measuredusing the ELISA reader at 570 nm. The unknown protein concentration (X) was calculated as follows:where,OD1& OD2: Optical densities of Standard (Std) 1 & Standard (Std) 2, respectively.BSA: Bovine serum albuminX×50 (dilution factor)/1000 = YConcentration of unknown protein (μg/μl) = Y × OD
-
Materials and Methods462.2.5 Cell proliferation assayThe method described earlier by Gilliesand co-workerswas slightly modified and followed (Gillies et al.,1986). Briefly, parentaland profilin-stable cells were seeded in triplicates at a density of 20,000 cells per well of a 24-well culture plates. Each day after seeding, cells were washed with PBS and stained with 0.2% crystal violet in 2% ethanol for 15 minutes. Vigorous washing was done with PBS to remove excess dye. Crystal violet dye was then eluted using 1% SDS solution with extensive pipetting and diluted 10 fold. Absorbance of the extracted dye was then determined at 570 nm in a spectrophotometer. Absorbance data based on triplicate set of samples for each experimental condition were then averaged for each time point to generate a growth curve.2.2.6 Preparation of whole cell, cytoplasmic and nuclear lysatesIn order to extract the total cell homogenate, the culture media was removed and cells were washed with ice cold PBS. The cells were then gently scrapped and pelleted by centrifugation at 3000 rpm for 3 minutes at 4°C. The cell extraction buffer was added to the cell pellet and placed on rotor kept in cold room for 30 minutes for cell lysis. Lysed cellswere then centrifuged at 13000 rpm for 10min at 4°C. The supernatant was collected as cellular lysate. Protein concentration was estimated using Bradfordassay, described below.For a typical Western blot assay, 30-70μg of protein was loaded on theSDS-PAGE.For the preparation of cytoplasmic lysate,ice-cold hypotonic cytoplasmic extract buffer was added in the cell pellet andgently mixed with the pipette in a microfuge tube. The cell suspension was incubated on ice for 30 minto allow them to swell.After incubation, freshly prepared 10% NP-40was added andvortexed vigorously for 15 seconds torupture the plasma membrane. The contents were then centrifuged at 13000 rpmfor a minuteat 4°C and supernatant containing the cytoplasmic lysate was transferred to another pre-chilled microfuge tube and stored at –70°C.The pellet was then further processed for extraction of nuclear lysate.For this, ice-cold nuclear extractbuffer was added to the pellet and incubated on ice for 45 min with intermittent vortexingafter every 10 min of incubation. Finally, cell suspension wascentrifuged for 5 min at 14000rpm. The supernatant containing nuclear lysatewas stored at –70°C for further experiment
-
The method described earlier by Gilliesand co-workerswas slightly modified and followed (Gillies et al.,1986). Briefly, parentaland profilin-stable cells were seeded in triplicates at a density of 20,000 cells per well of a 24-well culture plates. Each day after seeding, cells were washed with PBS and stained with 0.2% crystal violet in 2% ethanol for 15 minutes. Vigorous washing was done with PBS to remove excess dye. Crystal violet dye was then eluted using 1% SDS solution with extensive pipetting and diluted 10 fold. Absorbance of the extracted dye was then determined at 570 nm in a spectrophotometer. Absorbance data based on triplicate set of samples for each experimental condition were then averaged for each time point to generate a growth curve
-
Cell proliferation assay
-
Wound healing assay(Liang et al., 2007) was employed to study the difference in migration rates ofprofilin-stable compared to parentalcells. Briefly, cells were cultured upto 90-95% confluent monolayer and a scratch was created through the cell monolayer with sterile needle. Cell debris was then removed by washing with PBS before adding the media. Images of the open gap created by this “wound” were then captured at three random locations immediately (0 h) and then at the same locations after regular interval using phase contrast microscopy untilthey are closed by migrating cells. Captured images were then used to quantify wound closure by the percentage change in the wound area per unit time and averaged for three locations for each experimental condition. During the course of the experiment, cells were maintained in 0.1% FBS containing DMEM media to ensure that wound closurewas due to the migration of cells rather thandivisonof cells
-
Briefly, cells were cultured on 35 mm culture dishes (Corning) and were transfected with pcDNA3.1 (+) empty vector or pcDNA3.1 (+) profilin-1 clone (encodes for neomycin resistance for selection in mammalian cells) using Lipofectamine 2000 reagent. The following day, cells were trypsinized and plated in four 10 cm culture dishes separately for each cell clones in selective media containing 800μg/ml of Geneticin, G418 (whose concentration was obtained from kill curve based on MTT assay). Over the time,it will select only those cells that have stably incorporated the plasmid into their genomic DNA. Cells were selected in G418 for about two weeks until colonies appeared. Meanwhile, cells were regularly washed with sterile PBSto remove dead cells from culture dishes. Colonies were picked using a pipettewith a sterile tip by loweringitto the surface of the colony of interest, followed by gentle scraping and rapid sucking.About 20 colonies were picked, followed by dilution plating in 96-well plates until single cell per well was obtained to establish a pure colony. Once colonies have reached to fair confluency, they were further expanded by dilution plating and screened for stable expression of profilinby immunoblotting and semi-quantitative RT-PCR. Once the clonal cell line is established, aliquots were freezed for future use and rest were maintained in lower concentration of G418 with proper track of passage number
-
Transfection of plasmid DNAin cellswas performed using Lipofectamine 2000 reagent as per manufacturer’s protocolprovided with the reagent. Briefly, 0.5 to 1 million cells were seeded in a 60mm or 100mm tissue culture dish. After 12h of seeding,transfections were performed. 6-12 μg DNA was mixed in 500-1500 μl of Opti-MEM in one polypropylene tube and simultaneously, 15-30 μl of Lipofectamine 2000 was mixed in similar volumes of Opti-MEM in another tube and incubated at room temperature for 10minutes. Opti-MEM containingDNA and Lipofectamine 2000 were then mixed and incubated for 30 minutes at room temperature for the formation of DNA-lipid complex. Meanwhile, the cells were washed with sterile PBS and 4-10ml of Opti-MEM was addedin the plate. DNA-lipid complexes were then added to each dish for 6h. After that, the medium containing complexes was removed and complete medium (DMEM containing FBS) was added. Expression of transgene was evaluated 24-48hafter transfectioneitherby immunoblottingor immunofluorescence or by RT-PCR followed by PCR
-
Inpresent thesis, various cell lines have been used as mentionedearlier. Cells were either cultured in DMEM or RPMI medium containing 10% fetal bovine serum (FBS)along with antibiotics such as penicillin (100 U/ml), and streptomycin (100 μg/ml).In general, cells were grownin tissue culture T-75 flaskupto 85-90% confluency. Cells are washedwith PBS, followed by trypsinization with 0.05% Trypsin EDTA solution. Cells were detachedfrom the surfaceeither by gentle tapping or gentlepipettingor incubated for 5 minutes at 37°C. Culture medium containing serum was then added to inactivate trypsin. After careful mixing, cells were transferred to a 15 ml tube and centrifuged at 800 rpm for 5minutes. The cell pellet wasre-suspended in a fresh culture media containing FBS. The cell viability was checked by trypan blue staining, followed bycounting in Neubauer cell-counting chamber. Appropriate number of cells wasthen either sub-culturedin the ratio of 1:4 to 1:6or seeded in culture dishes as per the experimental requirements.Cells were maintained in humidified incubator at 37ºC in 5% CO2-95% air, throughout the experiment
-
Extraction buffer
-
MTT reagent
-
6XEMSA sample loading dye
-
5X EMSA buffer
-
Native EMSA PAGE
-
10XBinding buffer
-
Inoue buffer
-
6X DNA loading dye
-
Agarose gel
-
TAE
-
Nuclear lysis buffer (without protease inhibitors
-
Cytoplasmic extraction buffer (without protease inhibitors)
-
Blocking buffer: 2% BSA
-
Permeabilisation buffer: 0.2% Triton X100
-
4% Formaldehyde fixative
-
Stripping buffer
Tags
- Md-23-d
- Mt-4-Mt-1-Mt-7-Mt-1-d
- Mt-4-Mt-1-Mt-7-Mt-3-d
- Md-5-d
- Md-14-d
- Mt-4-Mt-1-Mt-3-Mt-2-d
- Md-20-d
- Md-12-d
- Md-10-d
- Md-19-d
- Md-8-d
- Mt-4-Mt-1-Mt-3-Mt-3-d
- Md-9-d
- Mt-4-Mt-1-Mt-3-Mt-1-d
- Mt-4-Mt-1-Mt-7-Mt-2-d
- Md-4-d
- Md-28-d
- Md-25-d
- Md-27-d
- Mt-4-Mt-1-Mt-5-Mt-3-d
- Md-17-d
- Mt-4-Mt-1-Mt-8-Mt-1-d
- Md-26-d
- Md-6-d
- Mt-4-Mt-1-Mt-8-Mt-2-d
- Mt-4-Mt-1-Mt-4-Mt-2-d
- Md-7-d
- Md-29-d
- Md-16-d
- Mt-4-Mt-1-Mt-4-Mt-1-d
- Md-18-d
- Mt-4-Mt-1-Mt-2-Mt-9-d
- Md-11-d
- Mt-4-Mt-1-Mt-5-Mt-1-d
- Md-22-d
- Md-1-d
- Mt-4-Mt-1-Mt-6-Mt-1-d
- Md-15-d
- Md-2-d
- Md-24-d
- Md-21-d
- Mt-4-Mt-1-Mt-5-Mt-2-d
- Mt-4-Mt-1-Mt-7-Mt-4-d
- Md-13-d
- Md-3-d
Annotators
URL
-