66 Matching Annotations
- May 2019
-
shodhganga.inflibnet.ac.in shodhganga.inflibnet.ac.in
-
The reaction mixture contained 0.2 mL of enzyme sample, 0.3 mL of buffer and 0.5 mL of p-nitrophenyl-β-D-glucopyranoside (1.0 mM) prepared in 100 mM buffer as the substrate. The reaction was terminated after 30 min of incubation at 70 °C by adding 2 mL of sodium carbonate-bicarbonate buffer (0.1 M, pH 10.0). The liberation of p-nitrophenol was measured at 400 nm and its yield was determined using a standard curve of p-nitrophenol (1-10 μg mL-1) prepared in sodium carbonate-bicarbonate buffer
-
β-Glucosidase
-
The activities ofβ-xylosidase, xylan acetylesterase and arbinofuranosidase were measured using 1 mM p-nitrophenylxylopyranoside, p-nitrophenylacetate and p-nitrophenylarabinofuranoside, respectively prepared in sodium citrate buffer (0.1 M, pH 7.0). One mL of reaction mixture containing 0.2 mL of crude enzyme solution, 0.3 mL of sodium citrate buffer (0.1 M, pH 7.0) and 0.5 mL of substrate was incubated at 80 °C for 30 min. The reaction was terminated by adding 2 mL sodium carbonate-bicarbonate buffer (1.0 M, pH 10.0). The activities were determined using p-nitrophenol standard curve (1-10 μg mL-1) drawn using absorbance values measured in spectrophotometer at 400 nm. One unit of the enzyme is defined as the amount of enzyme that liberates 1μmole of p-nitrophenol mL-1min-1 under assay conditions.
-
Assays for β-Xylosidase, acetylesterase and arbinofuranosidase
-
Xylanolytic activity was determined according to Archana and Satyanarayana (1997). The reaction mixture containing 0.5 mL of 1% birchwood xylan in glycine NaOH buffer (0.1 M, pH 9.0) and 0.5 mL of cell free sonicated supernatant was incubated at 80 °C in a water bath for 10 min. After incubation, 1 mL DNSA reagent (Miller, 1959) was added to the reaction mixture and the tubes were incubated in a boiling water bath for 10 min, followed by the addition of 400 μL of 33% w/v sodium potassium tartrate. The absorbance values were recorded at 540 nm in a spectrophotometer (Shimadzu, Japan). The liberated reducing sugars were determined by comparing the absorbance values of these with a standard curve drawn with different concentrations of xylose. One unit (IU) of xylanase is defined as the amount of enzyme required for liberating one μmol of reducing sugar as xylose mL-1 min-1under the assay conditions. Composition of Dinitrosalicylic acid (DNSA) reagent NaOH - 10.0 g Phenol - 2.0 g DNSA - 2.0 g Distilled Water - 1000 mL DNSA reagent was stored in an amber bottle at 4 °C till further use. Sodium sulphite (0.05 % v/v) was added just before the use of the reagent.
-
Enzyme Assays
-
A stock solution of xylose (1 mg mL-1) was prepared in distilled water. A dilution series ranging from 100-1000 μg mL-1 was prepared from the stock solution. To 1 mL of solution, 1mL of DNSA was added and kept in a boiling water bath for 10 min and then 400 μL of sodium potassium tartrate solution was added and kept it for cooling. The absorbance was recorded in a spectrophotometer (Shimadzu, UV-VIS) at 540 nm
-
The clear cell-free supernatants were used as the source of crude recombinant xylanase.
-
Preparation of standard curve of xylose
-
-
sg.inflibnet.ac.in sg.inflibnet.ac.in
-
Tris, pH 7.4, 1 mM dithiothreitol, and 10% glycerol. Protein concentration w~s detennined by densitometry analysis of Commassie stained gels. Protein samples were stored at -70°C until further use
-
To facilitate the expression of recombinant GST-CDPK4 or its mutants, the desired regions of enzyme were PCR amplified using pGEMT-PfCDPK4 as template and PCR primers which possessed overhangs for XhoI and SmaI restriction enzymes (see List II). Often, the PCR products were cloned in TA cloning vector pGE¥T-I easy. Clones in pGEMT-easy vectors were digested with appropriate restriction enzymes to release the inserts. The released inserts were cloned in expression vector pGEX4T-l to facilitate the expression of recombinant proteins. In some cases, the PCR products were digested directly with restriction enzymes and ligated into expression vectors. The plasmid DNA for expression was used to transform E. coli BL21-RIL (Stratagene) strain for the expression of GST-PfCDPK4 and its mutants. Protein expression was induced by overnight incubation of cells with O.lmM IPTG at 18-20°e. Subsequently, cell pellets were suspended in ice cold lysis buffer, contaiJ;1ing 50 mM Tris, pH 7.4, 2 mM EDTA, 1 mM dithiothreitol, 1% TritonX-100, and protease inhibitors (lmM phenylmethylsulfonyl fluoride, 10~g/ml leupeptin, 1 O~g/ml pepstatin) and sonication was performed for 6 cycles of one minute each. The resulting cell debris was removed by centrifugation at 20,000g for 40 min at 4°C. Fusion proteins from the cell lysates were affinity-purified using glutathione-sepharose resin (Arnersham). Briefly, after the protein binding, the resin was washed with lysis buffer, and bound proteins were eluted with 50 mM Tris, pH 8.0 with 10 mM glutathione. Finally, purified proteins were dialyzed against 50 mM
-
xpression and Purification of Recombinant GST (Glutath ion e-S-Transferase) fusion PfCDPK4 and its mutant
-
-
sg.inflibnet.ac.in sg.inflibnet.ac.in
-
THP-1 macrophages and human peripheral blood monocyte derived macrophages were transfected with SMARTpool Bcl-2 siRNA (15 pmol), or ER-a siRNA (100 pmol), or ER-~ siRNA (100 pmol), or with negative control siRNA (15 pmol or 100 pmol) using TranspassR2 transfection reagent. Prior to transfection, the cells were depleted of serum by washing 2x with serum-free media. The transfection complex was prepared by diluting 0.5 J!L of transfection reagent A and 1.0 J!L of transfection reagent B to 400 J!L of serum-free media and siRNA's were added to the mix at an appropriate concentration and incubated for 20 min at room temperature. The formed transfection complexes were transferred gently using a large bore pipette tip to 105 cells/well grown in 24 well plates and incubated for 6 h, following which fresh complete medium was added. Transfection efficiency was estimated by observing Cy3-fluorescence of the negative control siRNA with a Nikon TE2000E fluorescence microscope using a tetramethyl rhodamine filter (530-580 nm). For all transfections, target protein knockdown was assessed 24 h after transfection by probing extracts oftransfected cells on Western blots using appropriate antibodies
-
siRNA transfection
-
-
shodhganga.inflibnet.ac.in shodhganga.inflibnet.ac.in
-
resuspended in 0.2 ml TE, and extracted successively with phenol, phenol-chloroform, and chloroform. In the aqueous phase, 0.25 volume of J 0 M ammonium acetate and two volumes of chilled ethanol were added and the mixture was incubated at room temperature for 5 min. to precipitate the plasmid DNA. The pure plasmid DNA was recovered by centrifugation at J 2,000 g for J 0 min. at 4 °C, washed with 70 %ethanol, dried and resuspended in TE buffer (pH 8.0). The amount and the purity of the DNA was done spectrophotometrically by recording the absorbance at 260 nm.
-
Plasmid DNA was prepared by alkaline lysis method of Ish-Horowicz ( 1981 ). 5 ml cultures were grown as described for small scale plasmid preparation. 0.5 ml from the growing culture was inoculated into 250 ml of LB containing ampicillin. The culture was grown for 12 h at 37 °C with vigorous shaking, centrifuged at 3000 g, at 4 °C, for 15 min. and the bacterial pellet was resuspended gently in 1 0 ml TEG buffer. The mixture was incubated at room temperature for 10 min., followed by addition of 20 ml of freshly prepared alkaline-SDS solution. The contents were mixed by inversion and the mixture was kept on ice for 10 min., followed by the addition of 15 ml of chilled potassium acetate solution. The contents were mixed by inverting the tube, and incubated on ice for 10 min. The lysed cell suspension was centrifuged at 5000 g, at 4 °C, for 20 min. The supernatant was taken, and nucleic acids we~,-.. precipitated by adding 0.6 volume of chilled isopropanol. The mixture was incubated on ice for 10 min. followed by centrifugation at 5000 gat 4 °C, for 10 min .. The pellet was washed with 70% ethanol, dried and resuspended in TE buffer. The plasmid DNA was purified further to remove the contaminating proteins and RNA following the PEG purification protocol as described by Sambrook et al ( 1989). Equal volume of chilled 5 M lithium chloride solution was added to DNA . suspension, mixed well and incubated on ice for 10 min. The precipitate was removed by centrifugation at 10,000 g at 4 °C, for 10 min. DNA was precipitated from the supernatant by adding equal volume of isopropanoL The mixture was centrifuged at 10,000 g for 10 min. at 4 °C and the pellet was washed with 70% ethanol. The DNA thus obtained was incubated in TE buffer containing 20 J.tg/ml of DNase free RNase A for 30 min. at room temperature. Afterwards, equal volume of 1.6 M NaCl containing 13% (w/v) PEG 8000 was added to DNA solution. The contents were. thoroughly mixed and centrifuged at 10,000 g, at 4 °C, for 10 min .. The pellet was
-
Large Scale Plasmid DNA Preparation
-
-
sg.inflibnet.ac.in sg.inflibnet.ac.in
-
administered as and when required. Animals were put on continuous mating with males of proven fertility after administration of the three primary injections and monitored for menstrual cyclicity and conception. Ab titres were determined as described above except that anti-monkey HRPO conjugate was used as the revealing Ab.
-
Female bonnet monkeys (Macaca radiata) reared at the Primate Facility (Nil, New Delhi) were selected and serum progesterone levels were estimated for atleast three months in samples which were collected biweekly. Animals showing atleast two consecutive normal ovulatory peaks (serum progesterone levels >2 ng/ml) (Bamezai, 1986) were selected for fertility trials. Five animals (MRA 375, 515, 640, 672, 770) immunized with 250 Jlg equivalent of r-bZP3, expressed in SG I3009[pREP4] cells, conjugated to DT, was emulsified with Squalene and Arlacel A, adjuvants permitted for human use, in a ratio of 4: I and administered intramuscularly at two sites. In addition, the primary dose also contained I mg/animal of SPLPS as an additional adjuvant. Animals were boosted at intervals of 4-6 weeks depending on the Ab titers with 250 Jlg of r-bZP3-DT using Squalene and Arlacel A as adjuvants. A second group of 3 monkeys (MRA 384, 502, 661) were immunized using a slightly different protocol. The primary immunization consisted of 125 J.lg of r-bZP3-DT and 125 J.lg of r-bZP3-TT (expressed in BL2I(DE3) cells) using the same adjuvants and immunization protocols mentioned above except that boosters were administered alternately with 250 Jlg of r-bZP3-DT or -TT conjugates using Squalene and Arlacel A as adjuvants. Following completion of the primary immunization and 2 boosters at monthly intervals, bleeds (1-2 ml) were collected biweekly from the antecubital vein for estimation of progesterone levels and Ab titres. Boosters were
-
Immunization of Female Bonnet Monkeys
-
Radiolabeling of Recombinant Proteins in Infected S/9 Cells
-
Peptide antisera were generated in the laboratory against peptides PI, 23-45 aa residues with an extra lysine at the N-terminus (KQPFWLLQGGASRAETSVQPVL VE), P2, 300-322 aa residues (CSFSKSSNSWFPVEGPADICQCC) and P3, 324-347 aa residues (KGDCGTPSHSRRQPHVVSQWSRSA) corresponding to bZP3 precursor protein in rabbits and were used to determine their reactivity with the r-bZP3 protein expressed in E. coli in an enzyme linked immunosorbent assay (ELISA). Microtitration plates were coated with 200 ng of r-bZP3 or I J.tg/well of the peptide. HRPO conjugated goat anti-rabbit Ig at I :5000 dilution was used as revealing Ab.
-
Reactivity with Anti-peptide Sera
-
The bZP3 sequence was analyzed using PCgene and Lasergene DNA and protein analysis softwares. The alignment of the bZP3 aa sequence with the homologous sequences from other species was carried out using the Cluster V Multiple Alignment Programme (Higgins and Sharp, 1989).
-
Analysis of Sequence
-
-
shodhganga.inflibnet.ac.in shodhganga.inflibnet.ac.in
-
Transformation was performed in chilled 1.5 ml eppendorf tubes, using 200 ul of competent cells and about 50 ng of ligated plasmid DNA. Frozen competent cells were thawed in ice and the DNA was added immediately after thawing. The DNA volume was always kept under 30 ul. The DNA was mixed well with the cells by gentle tapping, and the tube incubated in ice for 3 0 minutes with occasional gentle shaking. The tube was then immersed in a 42°C water bath for 2 minutes, to give a heat shock to the cells. The cells were then incubated in ice for 10 minutes. Next, 1 ml LB was to the cells, and the cells incubated in a 37°C water bath without shaking, for one hour. 50 ul aliquots were plated in triplicate from the transformed cell mixture on suitable antibiotic containing agar plates and incubated 0/N at 37°C to select the transformants. In case of JM105 cells, the transformed cells were plated on antibiotic containing agar plates on which 50 ul of 2 % X-gal ( made in dimethyl formamide ) , and 10 ul of 100 mM IPTG had been spread in advance, to select for the lac-phenotype. The lac-colonies appeared colourless while the lac+ colonies were blue. For each batch of transformations, a negative control was included in which no DNA was added to the cells while keeping the rest of the procedure the same as for the test transformations.
-
Transformation procedure.
-
were stored at -70°C for at least six months without any significant loss in the competence.
-
A single ~.coli colony taken from an agar plate was used to inoculate 10 ml of LB and incubated 0/N at 37°C in an incubator-shaker. Next day, 0. 5 ml of this freshly grown culture was used to inoculate 100 ml of LB in a 500 ml flask. The culture was incubated at 37°C in an incubator -shaker and absorbance of the growing culture was monitored at 620 nm. When the A620 reached 0. 4 -0. 5 ( in about 120 -150 minutes), the flask was rapidly chilled by shaking in ice. The cells were harvested in sterile, chilled centrifuge bottles at 4, ooog for 10 minutes at 4 °c. The pellet was gently resuspended in 50 ml sterile, ice cold 100 mM cacl2 and the cells incubated in ice for 30 minutes. The cells were again centrifuged as above and the pellet resuspended in 6.5 ml of sterile, chilled, 100 mM cac12 containing 15 % glycerol. The cells were resuspended very gently, and a 200 ul aliquot was transformed with a standard plasmid DNA to check the competence of the cells. Meanwhile, the rest of the competent cells were incubated in ice for 16 -18 hours, to increase the competence of the cells a further few fold. After ascertaining high transformation efficiency of the competent cells, the cells were dispensed as 200 ul aliquots into prechilled, sterile 1.5 ml eppendorf tubes. These cells
-
Preparation of competent E.coli cells.
-
All glassware I plasticware used for transformation procedure was sterile and prechilled.
-
Transformation of E.coli.
-
-
sg.inflibnet.ac.in sg.inflibnet.ac.in
-
collected by centrifugation at 12,000 X g for 15 min, and washed with 70% ethanol. The pellet was air-dried and resuspended in 20 Jll TE. The clones were checked for the pres~nce of the insert by restriction analysis. The digestion products were checked on 1% agarose gel for the release of the insert. One positive clone was selected from each set of transformations and the plasmid DNA was purified in large amount for the insert preparation.
-
Transformants picked following blue-white selection were inoculated in 5 ml LB medium containing 100 j...tg/ml ampicillin (LBamp) and grown 0/N. Following day, 1.5 ml aliquots of 0/N culture were harvested by centrifugation at 10,000 X g in a microfuge. The supernatant was discarded and the pellet was resuspended in 100 j...tl of chilled TEG (25 mM Tris-Cl, pH 8.0, 10 mM EDTA and 50 mM glucose) and incubated for 10 min at RT. After incubation, 200 j...tl of freshly prepared alkaline-SDS (0.2 N NaOH, 1% SDS; sodium dodecyl sulfate) was added and the contents were mixed gently by inversion. This was followed by incubation on ice for 10 min. Post-incubation, 150 j...tl of ice-cold sodium acetate solution (3 M, pH 5.2) was added to the mixture and incubated on ice for 15 min. After incubation, the contents were centrifuged at 12,000 X g for 15 min at 4°C and the supernatant was carefully transferred to a fresh tube. DNA was precipitated by adding 0.6 volumes of isopropanol and incubating at RT for 10 min. The DNA pellet was obtained by centrifugation at 12,000 X g at RT for 15 min, air-dried and dissolved in 200 j...tl of TE. To remove RNA contamination, 50 j.lg of DNase free RNase was added and incubated for 1 h at 37°C. Plasmid DNA was then extracted once with an equal volume of phenol equilibrated with TE (I 0 mM Tris, pH 8.0 and 1 mM EDT A) followed by extraction with phenol : chloroform : isoamyl alcohol (25 : 24 : 1) and then with chloroform : isoamyl alcohol (24 : 1 ). DNA was precipitated by addition of 2 volumes of chilled 100% ethanol to the aqueous phase and incubating the contents at -70°C for 30 min. The DNA pellet was
-
Small scale plasmid DNA isolation and restriction
-
-
shodhganga.inflibnet.ac.in shodhganga.inflibnet.ac.in
-
ITALYusinga96wellmicrolitreplatereadbyELISAmicroplatereader(modelEL3/Sx,BioTeKInstrumentsINC).Thefinalsolutionwasreadatawavelengthof450nm.Theplasmacortisolconcentrationwascalculatedbasedonaseriesofstandards.
-
PlasmacortisolwasmeasuredbyadirectimmunoenzymaticdeterminationofcortisolkitmanufacturedbyEquiparSriviaG.Ferrari,21/N-21047,SARONNO
-
Plasmacortisol
-
phosphoricacidformedisreducedbytheadditionof1-amino2napthol~4-sulphonicacid(ANSA)reagenttoproducethebluecolor.Theactivityofthebluecolorwasreadat680nmagainstreagentblankusingaU.V.Spectrophotometer.Suitablestandardswererunthrougheachbatchofassays.Theenzymeactivitywasexpressedintermsofpgofinorganicphosphorusformedhr'1mg'1protein.
-
Aftereffluentexposure,thecontrolandeffluentexposedfishtissueswereremovedandplacedinabeakercontainingice-coldSEIbuffer(300mMsucrose,200mMNa2EDTA,50mMimidazole,pH7.23)foranalysisofNa+-K+ATPaseactivity.ThetissueswereimmediatelyfrozeninliquidN2andstoredat-80°Cuntilanalyzed. Thespecificactivitiesofsodium,potassium,magnesiumandcalciumdependentATPaseswereassayedaccordingtothemethodsdescribedbyWatsonandBeamish(1980)and Boeseetal.(1982).AdenosinetriphosphatasecatalysestheconversionofATPandADP.Duringthisconversion,onemolecule ofphosphorusisliberated.ATPaseAdenosinetriphosphate^...^Adenosinediphosphate+PTheinorganicphosphorusliberatedwasassayedaccordingtothemethodofFiskeandSubbarow(1925).Inthismethodtheproteinisprecipitatedwithtrichloroaceticacid.Theproteinfreefiltrateistreatedwithaceticacidmolybdatesolutionandthe
-
Na+K+ATPase,Mg2+ATPaseandCa2+ATPase
-
ThecircadianrhythmofbimodalO2uptakeofcontrolandeffluenttreatedfisheswerestudiedseparatelyat28°±1°C.TheamountsofO2extractedfromwaterandairwereseparatelydeterminedforadayatregularintervalsof3hreach.TotalO2uptakeateachtimewasobtainedbysummingupthevaluesforaquaticandaerialrespirationobtainedatthecorrespondingtime.Throughoutthepresentstudy,theinitialO2contentofthewaterwaskeptconstant(6±0.5mgF1)
-
CircadianrhythmofbimodalO2uptake
-
Forstudyingtheaerialrespirationoffishesinair,respirometersweredesignedinvolvingtheprinciplesofmonometrictechniques.Thesetup(Figure10and11)consistsofarespiratorychamberconnectedtoagraduated‘U’tubecontainingBrodie’sfluid.KOHisusedasCO2absorbent.Thedifferenceinthelevelofthefluidinthemanometerforagiventimeisusedinthefollowingequationandthegasutilizediscalculated.VixhV=-...........-10,000Where,‘V’isthevolumeofthegasutilized‘Vi’isthevolume ofgasintherespiratorychamber‘h’isthedifferenceintheleveloftheBrodie’sfluidinthemanometerand10,000isthepressureofmanometricfluid(Brodie’sfluid)inmm
-
AerialRespiration
-
Theexperimentalsetup(Figure8and9)forthedeterminationofO2uptakesimultaneouslyfromairandwaterwassimilartothatusedearlierbyNatarajan(1972),Rani(1994)andVijayalakshmi(1996).Aclosedglassrespirometerof5litrecapacitywasfilledwith3.5litrefreshtapwater.Athermocolfloatwithasemicircularholeatitsperipherywasplacedoverthewater,whichseparatedtheair-waterinterphaseoftherespirometer.Theair-phaseoftherespirometerwasattachedtoafluidmanometer.Asthefishcomestothewatersurfaceandtakesair-gulp,thereisapressurechangeintheair-phasecausinganimbalanceinthemanometricfluid.AgraduatedsyringefilledwithpureO2(takenfrommedicalO2cylinder)isusedtorestoretheimbalanceofthemanometricfluid.TheamountthusneededshowstheaerialO2uptakeofthefish.TheexpiredCO2wasabsorbedbythepelletsofKOHinthepetridishoverthemanometricfluid.Theconcentrationofdissolvedoxygenoftheambientwaterwasestimatedbefore andaftertheexperimenttomeasuretheaquaticO2uptakebythefish.ThedifferenceintheDOandtheamountofwaterindicatestheactualaquaticO2uptake.Winkler’svolumetricmethod(Welch,1948)wasusedtoestimatetoDOofthewatersamples.Darkenedrespiratorychamberswereusedwithdimensionsthatwereclosetothoseofthefishinorderthatthefishshouldremaininmoreorlessthesamepositionbut havesufficientroomtomoveitsopercula.Theflowofwaterthroughtherespirometer wasregulatedandmeasuredbymeansofaflowmeter.APhilipsO2electrode(PI1056)waskeptinawaterjacketmaintainedatthesametemperatureastheclosedcirculation.SamplesoftheinflowandoverflowwatercouldalsobeledovertheO2electrode
-
Bimodalrespiration
-
Theexperimentalfishwasacclimatedtoglassrespirometersforabout24hrandtheywerenotgivenanyfoodduringthisperiod.TheeffluentexposedfishesalongwiththecontrolsweresubjectedtoO2consumptionseparately.Theexperimentswereperformedinaninsulatedroombetween8to10AMwithlightson.TherateoftotalO2uptakethroughgillsfromflowingwaters(DO=7.2mg021'1)wasmeasuredinfishesofdifferent body weights.Forthis,acylindricalglassrespirometerof2litrecapacitywasused.Thefishwasintroducedintherespirometerwhichwasconnectedtoalargeconstantlevelwatertanktomaintaintheflowofwaterunderconstanthydrostaticpressure.Thewaterenteredtherespirometeratonesideanditsflowperminutewasmeasuredasitlefttheotherside.Theflowwasadjustedaccordingtothesizeofthefish.Thefishwasacclimatizedtotherespirometeratleast12hrbeforereadingswere taken.ConcentrationofdissolvedoxygeninthesampleswasmeasuredbyWinkler’svolumetricmethod(Welch,1948).ThedifferenceinO?levelsbetweentheambientwaterandthatsuppliedtotherespirometeraswellaswiththerateofwaterflowandtheweightofthefishwasusedtocalculatetherateof O2uptakeintermsoftime(ml02hr'1)withthehelpoftheequation:V02=Vw(Ci02CE02)Where,VO2=02uptake(ml02hr'1)Vw=water(mlm'1)andCi02-CE02respectivelythe02concentrationofinletandoutletwaters.Arespirometercontainingnoanimalsservedasacontrolforadjustingcalculationsfor02uptakeinthewater.Uponremoval,fisheswereblottedwithpapertoweling, andweighed
-
Aquaticrespiration
-
Theeffectof2%,5%and7%effluentexposureontheoxygenuptakewasmeasuredatexperimentalconditions,viz.,(a)whenaccesstoairwasprevented(aquaticconsumption),(b)whenitwasallowed(bimodalrespiration)and(c)underaerialconditions(aerialrespiration)
-
Effectofeffluentexposureontheoxygenconsumption
-
Respirationstudies
Tags
- Method-8-Method-4-detail
- Method-8-Method-3-detail
- Method-19-Method-8
- Method-8-Method-1-detail
- Method-17-Method-8-detail
- Method-8-Method-5
- Method-8
- Method-17-Method-8
- Method-8-Method-1
- Method-8-Method-4
- Method-8-Method-2-detail
- Method-8-Method-2
- Method-8-Method-5-detail
- Method-8-Method-3
- Method-19-Method-8-detail
Annotators
URL
-
-
shodhganga.inflibnet.ac.in shodhganga.inflibnet.ac.in
-
All the cell lines were grown and maintained in Dulbecco' s modified Eagle's medium (DMEM) with 10% Fetal bovine serum (FBS) and 1% antibiotic-antimycotic (penicillin, streptromycin and amphotericin B). The cells were maintained at 37<>C with 5% C02 in a humidified CD2 incubator (Nuaire-IR Autoflow CD2 Water-Jacketed incubator)
-
ell culture media and cell lines
-
-
sg.inflibnet.ac.in sg.inflibnet.ac.in
-
C-1 (5,5' ,6,6' -tetrachlorol,1' ,3,3' tetraethyl benzimidazoly 1 carbocyanine iodide) is an anionic mitochondrial vital dye (10mm stock prepared in DMSO) that is lipophilic and becomes concentrated in the mitochondria in proportion to the membrane potential; more dye accumulates in mitochondria with greater potential and ATP generating capacity. The dye exists as a monomer at low concentrations that emit a green fluorescence (530nm) but at high concentrations forms J aggregates that emit red fluorescence (590nm). The ratio of the two fluorescences gives a ratiometric comparison of mitochondrial membrane potential. Following appropriate treatment, 107 (in 1mL medium) cells were transferred to an MCT containing 10pL of the working stock (0.4mM ) of the dye (final concentration of 4pM), and incubated at 37°C for exactly 10 min in the dark. This was followed by centrifugation at 1811 x g for 3 min at RT. The pellet obtained was resuspended in M199 medium containing 10% FBS and centrifuged at 1811 x g for 3 min at RT. Two more such washes were given, after which the pellet was resuspended in 2mL M199 + 10% FBS and fluorescence measured at 485nm/ 530nm and 535nm/ 590nm
-
Assay for measuring Mitochondrial Membrane Potential (JC-1 Staining)
-
Germany) as per manufacturer's protocol. Briefly, the gel was solubilised by incubating it with buffer QG (composition proprietary) at S0°C for 10 min. The solubilized gel was loaded onto a binding column and centrifuged at 12000 x g for 1 min. The flow through was discarded and the column was washed once with buffer PE containing ethanol. The DNA bound to the column was eluted using the elution buffer provided with the kit, or alternatively with nuclease-free water. The concentration of the obtained DNA was estimated by measuring the absorbance at 260nm (A26o) and using the known formula: DNA concentration= A26o X SOX dilution factor.
-
To elute DNA from agarose gel, samples were loaded on a low-melting agarose gel. The samples were resolved and visualized under UV transilluminator, and the band of interest was excised quickly using a scalpel blade. The volume of gel slice was quantified by weighing and the DNA eluted using MinElute Gel Extraction kit from Qiagen (Hilden
-
Elution of DNA from agarose gel
-
-
sg.inflibnet.ac.in sg.inflibnet.ac.in
-
The tannin sample (1.0 ml) was added to 2.0 ml BSA solution in a 15 ml glass centrifuge tube. The solution was mixed and allowed to stand at room temperature for 15 min and then centrifuged at 10000 rpm for 15 min to separate the precipitated tannin-protein complex as pellet. The supernatant was discarded and the pellet and the walls of the tube were washed with acetate buffer without disturbing the pellet. Now, the pellet was dissolved in 4.0 ml of SDS-triethanolamine solution and to this, 1.0 ml of ferric chloride reagent was added and was mixed immediately. After 30 min of addition of ferric chloride, the absorbance was noted at 510 nm on spectrophotometer. All observations were carried out in triplicates. The concentration of the tannin was determined with the help of tannic acid (Sigma) standard curve prepared in the range of 0.2 to 1.0 mg/ml
-
The procedure of Hagerman and Butler (1978) was used to estimate the tannin content in different tannin sources. Reagents: Bovine serum albumin (BSA) 1.0 mg/ml: 10.0 mg of bovine serum albumin was dissolved in 10.0 ml of 0.2 M acetate buffer, pH 5.0, containing 0.17 M sodium chloride. Sodium dodecyl sulfate (SDS)-triethanolamine solution: The solution contained 1.0% SDS and 5.0% (v/v) triethanolamine in distilled water. Ferric chloride reagent (0.01 M): 1.62 g of ferric chloride was dissolved in 1.0 L of 0.01 N hydrochloric acid.
-
Tannin estimation (Hagerman and Butler, 1978)
-
-
shodhganga.inflibnet.ac.in shodhganga.inflibnet.ac.in
-
Cultures in mid-exponential phasenormalized using A600and solubilizedin 1X sample buffer at 99°C for 5 min were subjected to electrophoresis on 12% sodium dodecyl sulfate (SDS) -polyacrylamide gels. Cell extracts equivalent to 0.04A600(1X) and 0.02A600(0.5X) were loaded and run using Tris-glycine-(SDS) buffer. Separated proteins were electrotransferred to PVDF polyvinyledene difluoride) membrane (Amersham) electrophoretically by a semi-dry method using Bio-Rad apparatus.The transfer was done for 2-3 hrs using a voltage of 75V at 4oC and membrane was probed using anti-FtsZ primary antibody at 1:5000 dilution (rabbit, polyclonal), washed and probed with anti-rabbit IgG conjugated to horseradish peroxidase (HRP) at 1:20000 dilution, as described(Sambrook & Russell, 2001).Membranes were developed with chemiluminescencereagent (Amersham ECL Prime) and visualized with the aid of a chemiluminescence detection system according to the manufacturer’s protocol (Sigma Chemical Co., St. Louis, MO). Quantification of band intensity and subtraction of background was done using Fujifilm Multi Gauge V3.0 imaging system(Image Quant software)
-
Gel Electrophoresis and Western blotting
-
Growth curves were generated to compare the growth rates of E. coli test strains with control strains manually. The appropriate dilutions of the overnight cultures in desired media were made and allowed to grow at required temperature till faint turbidity was visible. At this point samples were collected every 30 minutes until stationary phase was attained. The growth curves weregenerated using Microsoft Excel or SigmaPlot software and growth rates were calculated from the slope of the graph which, in turn, was used to calculate generation time
-
Estimation of growth rates
-