there's not enough full teardown to justify a waitlist, usually under 10 a year for intense restoration. Most of my work is always thorough otherwise!

i couldn't 4:50 get into the typewriter the screws were 4:52 in there so tight that there was no way 4:54 i could get that bottom off of the 4:55 machine so i did the only logical thing 4:58 i could think of i set it upside down 4:59 and then forgot about it for a really 5:01 long time i then went back in once i got 5:03 the confidence to go into this machine

i don't know 4:26 how i fixed it i kind of stabbed it a 4:28 lot with a screwdriver until it worked

in fact almost 0:28 all of my successful repairs have come 0:30 from a lot of faith trust a little bit 0:32 of pixie dust and a lot of googling

Soderbeck tells us about a recent job that took 40 hours to complete. He ended up charging the customer just $50.

"Business went right to nothing, hardly," he remembers. "As soon as that computer hit the price of under $2,000, that was the end of the typewriter business—80% of the business was gone in three years. When I started there was 27 little shops like this in the Twin Cities, and there was 47 before that."

This has been an ongoing "philosophers stone" in the repair community for a long time. Hard platens are the result of the rubber losing its moisture, there's virtually no way to fix that long term. Brake fluid, rubber renew, even the wintergreen oil trick only temporarily soften platens/feeds. They will absolutely go back to their former state after a time. (1-2 months) You can sand the exterior and clean with organic solvents to restore grip and improve the original platen, but recovery is really the only long term fix. *There's a ton of back and forth about the sanding method, particularly from the old timers being salty about it. But I have seen HUNDREDS of old platens in machines that have absolutely been sanded by repair folks back in the day, so there's definitely value in the process.