I suggest you to make this a new question. This will also get better answers.

It will be seen from the foregoing that care isrequired in the appKcation of the card system,and that neglect must sooner or later lead to failure. There wasindeed a time when it seemed doubtful whether the card systemwould survive the first attempts. It was even tried and abandonedby some. These early failures were in the main due to the absenceof expert labour and to the higher order of accuracy required ascompared with the book system. The systems were not thenplanned out with that care that is bestowed upon them now. Onesystem would be started and presently there would be a decisionto alter it so as to fall in with riper experience. In the absenceof one system consistently adhered to the files soon got into achaotic condition until at last they had to be abandoned, for infact they had become useless.

Closing this issue down as a duplicate for now. If you feel that neither of these issues exactly fits your own proposal, pleae don't hesitate to reopen the issue. 😃

there's a there's an embryo that's going to develop into a human individual well what you can do is you can take a little needle and and and make some scratches in that blastoderm and for about four or five hours before they heal up again 00:23:12 every island is going to basically decide that it's on its own and is going to start making an embryo when they do heal you have conjoin twins triplets whatever

share our own experience

You can access Events through a few interfaces: Webhooks (we POST data to your URL). The Events API (you GET data through the API). The Logs tab of the Control Panel (GUI).

In the guide below, you may see different terms referring to the same thing.

They are 100% identical; just different names. From podman-build: “Builds an image using instructions from one or more Containerfiles or Dockerfiles and a specified build context directory. A Containerfile uses the same syntax as a Dockerfile internally. For this document, a file referred to as a Containerfile can be a file named either ‘Containerfile’ or ‘Dockerfile’.”

its jobs (internal representation of process groups)

The final lecture of the course considers Christianity as “the ever-adapting religion,” asking what elements remain constant within allits historical changes.

in my personal opinion, there shouldn't be a special treatment of do-end blocks in general. I believe that anything that starts a "block", i.e. something that is terminated by and end, should have the same indentation logic

Warning: The client should not repeat this request without modification.

The definitions provided are tremendously valuable to figure out the very similar but different two paradigms.

Epics, issues, requirements, and others all have similar but just subtle enough differences in common interactions that the user needs to hold a complicated mental model of how they each behave.

We read different texts for different reasons, regardlessof the subject.

I have always liked the weaving loom as a metaphor for weaving the absolute and relative together into one cloth. The absolute can be the warp, the relative can be the woof, and the shuttle or the jade works , can spin them all together into one cloth. It’s not that we have to make them into one cloth, they are always manifesting together in simultaneous realization . The jade works is the activity of life itself, the total dynamic functioning of the activity of the universe. Sometimes translated as: The Whole Works. Always right here. All-at-oneness.

Every work of art can be read, according to Eco, in three distinct ways: the moral, the allegorical and the anagogical.

Pros & Cons

The possibility of arbitrary internal branching.

After Alexi McCammond was named editor in chief of Teen Vogue, people discovered and recirculated on Instagram old anti-Asian and homophobic tweets she had written a decade earlier, while still a teenager.

You would think it would be a good thing for the young readers of Teen Vogue to learn forgiveness and mercy, but for the New Puritans, there is no statute of limitations.

When you are using postman they are not restricted by this policy. Quoted from Cross-Origin XMLHttpRequest: Regular web pages can use the XMLHttpRequest object to send and receive data from remote servers, but they're limited by the same origin policy. Extensions aren't so limited. An extension can talk to remote servers outside of its origin, as long as it first requests cross-origin permissions.

Now, a solution would be to look inside the iframe contents document.readystate, but with cross-origin content we get security exceptions here.

By looking at the code screenshot, you are either opening your mouth in awe or in appall. I feel there is no in-between here.

Different ways to prepend a line: (echo 'line to prepend';cat file)|sponge file sed -i '1iline to prepend' file # GNU sed -i '' $'1i\\\nline to prepend\n' file # BSD printf %s\\n 0a 'line to prepend' . w|ed -s file perl -pi -e 'print"line to prepend\n"if$.==1' file

The first argument to shared_context (the shared group name) is superfluous. It feels a bit like "what's this argument for again?" (Note that you could still use it with include_context to include the group manually, but it's a bit odd to mix-and-match the approaches).

Once a variable is specified with the use method, access it with EnvSetting.my_var Or you can still use the Hash syntax if you prefer it: EnvSetting["MY_VAR"]

However, this doesn’t mean that your email has to look the same across every client—it just needs to be easily accessible for all of your subscribers.

We’re big proponents of the idea that Email doesn’t have to look the same everywhere — if it looks different, but not broken, that’s fine.

Svelte is different in that by default most of your code is only going to run once; a console.log('foo') line in a component will only run when that component is first rendered.

In computer science, a tree is a widely used abstract data type that simulates a hierarchical tree structure

The distinction is important in disciplines such as logic, linguistics, metalogic, typography, and computer programming.

non-regression testing

OpenFaaS is hosted by OpenFaaS Ltd (registration: 11076587), a company which also offers commercial services, homepage sponsorships, and support.

In order to invoke, or run

A task is often called step.

I want to emphasize that Result is just an alternative name for the Either monad.

it is inconvenient to write specific implementations for each datatype contained, especially if the code for each datatype is virtually identical. For example, in C++, this duplication of code can be circumvented by defining a class template

An operation has two invocation styles. This is the only difference to an Activity.

We decided against paid documentation, so all will be freely available on our shiny new website.

What this means is: I better refrain from writing a new book and we rather focus on more and better docs.

Examples of different ways of defining forms

Any representation of information such as a chart, diagram or table. Multiple views of the same information are possible, such as a bar chart for management and a tabular view for accountants.

Now if you think about it, PJAX sounds a lot like Turbolinks. They both use JS to fetch server-rendered HTML and put it into the DOM. They both do caching and manage the forward and back buttons. It's almost as if the Rails team took a technique developed elsewhere and just rebranded it.

That won't work if the external content is on another site due to same origin policy. In some obscure cases, the remote site might support JSONP; but probably not.

overflow-wrap: break-word; makes sure the long string will wrap and not bust out of the container. You might as well use word-wrap as well because as the spec says, they are literally just alternate names for each other. Some browsers support one and not the other.

Depending on what other component libraries you’ve used, you may be used to handling events by passing callback functions to component properties, or using a special event syntax – Svelte supports both, though one is usually more appropriate than the other depending on your situation. This post explains both ways.

JSONP is really a simply trick to overcome XMLHttpRequest same domain policy. (As you know one cannot send AJAX (XMLHttpRequest) request to a different domain.) So - instead of using XMLHttpRequest we have to use script HTMLl tags, the ones you usually use to load JS files, in order for JS to get data from another domain. Sounds weird?

Frankly, if the Ubuntu Desktop team “switch” from making a deb of Chromium to making a snap, I doubt they’d switch back. It’s a tremendous amount of work for developer(s) to maintain numerous debs across all supported releases. Maintaining a single snap is just practically and financially more sensible.

delete myObject.regex; // or, delete myObject['regex']; // or, var prop = "regex"; delete myObject[prop];

emphasizing that 'this' and 'global object' are two different things not only in Node.js but in JavaScript in general

There is no rerender, when you call listen, then all scroll events will warn on chrome. See this entry from svelte: breaking the web

Never use x && y || z when y can return a non-zero exit status.

I think what the author intended to do was check if the second argument was a non-empty string (which is not the same thing as checking whether there are more than 1 argument, as the second argument could be passed but be the empty string).

However, this construct is not completely equivalent to if ... fi in the general case.

Some people try to use && and || as a shortcut syntax for if ... then ... else ... fi, perhaps because they think they are being clever.

can you not also use a .babelrc?

React Final Form was written by the same guy (@erikras) that wrote Redux Form, so much of the API is exactly the same.

Paths are traversed in the order they occur in the search path. By default, this means the files in app/assets take precedence, and will mask corresponding paths in lib and vendor.

It’s a risky blanket statement that causes bloat by including all the mistakes you made while building the original product.

hyperscript is a perfectly good alternative and uses the same interface as matt esch's virtual-dom

An onevent event handler property serves as a placeholder of sorts, to which a single event handler can be assigned. In order to allow multiple handlers to be installed for the same event on a given object, you can call its addEventListener() method, which manages a list of handlers for the given event on the object.

"The Map is not the territory" —Alfred Korzybski

Alfred Korzybski remarked that "the map is not the territory" and that "the word is not the thing", encapsulating his view that an abstraction derived from something, or a reaction to it, is not the thing itself.

"The menu is not the meal."

A map is not the territory it represents, but, if correct, it has a similar structure to the territory, which accounts for its usefulness.

An alternative (maybe not good) would be to restrict {@const} to certain blocks like {#each} and {#if}. In both cases, it significantly reduces the "multiple ways to do the same thing" problem and avoids ergonomic and performance overhead of our current situation.

it also allows for more divergence in how people write there code and where they put their logic, making different svelte codebases potentially even more different due to fewer constraints. This last point is actually something I really value, I read a lot of Svelte code by a lot of different people and broadly speaking things look the same and are in the same places.

I'm suggesting there should be a way to write lifecycle related code that also responds to changing props, like how useEffect works. I think how React handles this could be a good source of inspiration.

Svelte doesn't re-render, so you need to respond to component mount/dismount and prop changes separately as they are distinct concepts and never tied together, unlike in React.

Sometimes, you may be tempted to write that wrapper. Because all your (React or Vue or insert your reactive framework here) instincts tell you so.Resist the temptation. There is a better way. A svelter way. Introducing: the use-directive (a.k.a. “actions”).

However, especially when starting out, it’s very easy to fall into the “this is how I did things in my previous framework” trap.

Solid supports templating in 3 forms JSX, Tagged Template Literals, and Solid's HyperScript variant.

So while Solid's JSX and might resemble React it by no means works like React and there should be no illusions that a JSX library will just work with Solid. Afterall, there are no JSX libraries, as they all work without JSX, only HyperScript or React ones.

both copied much of their API from Redux Form, so, despite working very differently under the hood, there is a lot of overlap in their APIs.

If you’ve used Flow before, the syntax is fairly similar. One difference is that we’ve added a few restrictions to avoid code that might appear ambiguous.

For context, the previous API had a lazy promise. Currently I’m thinking we could just return a closure like in the React API

This is the same as useEffect in React, incidentally — the function must be synchronous in order to avoid race conditions.

The main rationale for this PR is that, in my hones opinion, Svelte needs a way to support style overrides in an intuitive and close to plain HTML/CSS way. What I regard as intuitive is: Looking at how customizing of styles is being done when applying a typical CSS component framework, and making that possible with Svelte.

Does it look like a decorator plugin in Ractive, right

Lets not extend the framework with yet another syntax

The more I think about this, the more I think that maybe React already has the right solution to this particular issue, and we're tying ourselves in knots trying to avoid unnecessary re-rendering. Basically, this JSX... <Foo {...a} b={1} {...c} d={2}/> ...translates to this JS: React.createElement(Foo, _extends({}, a, { b: 1 }, c, { d: 2 })); If we did the same thing (i.e. bail out of the optimisation allowed by knowing the attribute names ahead of time), our lives would get a lot simpler, and the performance characteristics would be pretty similar in all but somewhat contrived scenarios, I think. (It'll still be faster than React, anyway!)

Even as machine-readable data begins to permeate the web, it is typically distributed in a separate file, with a separate format, and very limited correspondence between the human and machine versions.

The content should always be the same. For news articles, specify the “NewsArticle” type. The headline should match your article’s title. The image object refers to the hero image of the article.

If you can, use AMP like any other JavaScript library to build your site and forget about the canonical linking. Using AMP to build a whole website dramatically reduces your maintenance burden.

As serious leaks become more common, surely we can expect tougher laws. But these laws are also making it difficult for those of us who wish to improve security by studying actual data. For years we have fought increasingly restrictive laws but the government’s argument has always been that it would only affect criminals.

Another approach I toyed with (very transiently) was blocking entire countries from accessing the API. I was always really hesitant to do this, but when 90% of the API traffic was suddenly coming from a country in West Africa, for example, that was a pretty quick win.

Well, as a home user, I also belong to an investment club with 10 members. I also have a medium size family who I like to send photo's to, and my son is on a soccer team. all those have greater than 5 people on the list. sooooooooo..... once again, the people with valid use of the internet have to 'deal' with those that abuse it.

The handler can be a method or a Proc object passed to the :with option. You can also use a block directly instead of an explicit Proc object.

Unless you specifically need the open source tool, most website owners will be better served by the hosted version

To never block or remove features from k6 in order to make them exclusive to Load Impact’s SaaS productStrive not to delay introduction of new features in the k6 OSS tool, if the feature was planned to appear both there and in Load Impact’s SaaS productTo never introduce into the k6 OSS tool any artificial limits designed to promote conversion to Load Impact’s SaaS productTo work with the community, participating in and prioritize building the functionality the k6 community wants, making it the prefered tool for load testing

With k6, our goal has always been to create the best load testing tool for the modern working developer and that we do this in collaboration with the k6 community. Our revenue will not come from k6 directly, but from premium value creating offers based on k6. These offers will be made available at https://loadimpact.com. Load Impact premium offers will have focus on providing further simplicity, productivity and ease to use functionality.

We believe the key to Load Impact’s long-term success as a Company is to foster an active community of users around k6 as an open source project. To achieve this long-term goal, it is vital that we do not withhold new features from k6 based on whether or not they compete with our SaaS offering.

Load Impact is a for profit organization, and recognizes that there is a need to balance this requirement with the needs of the k6 open source project. In the longer run, we strongly believe that those two needs will rarely be in conflict.

Same-day delivery market size in the U.S. from 2018 to 2022

Please don't name binstubs common executable names. It just creates a whole bunch of shadowing issues. Granted, I also have an npm issue at hand, but I do think naming your binstubs webpack and webpack-dev-server is asking for trouble. Why not webpacker and webpacker-dev-server?

The global executables are removed in latest release.

The literature shows that the vast majority of students report open textbooks to be of the same or better quality than the commercial textbooks they have used.

Fischer, Hilton, Robinson, & Wiley (2015) studied a large sample of students from six colleges and four community colleges in the US. Students in the treatment group (N=1087) used an open textbook or other OER in their courses, and students in the control group (N=9264) were asked to purchase traditional textbooks for different sections of the same courses. The authors found that the students using OER did just as well or better in most of the courses studied in terms of course grades and completion rates.

who say they feel the sting of racism much the same as other blacks.

.

VISITS

Members of the LGBT community wish to marry for the same reasons we all wish to get married, and must undergo the same processes if they were allowed to marry.

But since all likeness and relationship is IJieasurable to an individual, necessarily all are more or less lovers of themselves